Get matched with top sonic cleaning pros in Presto, PA

Moss grows in dark areas of roofs, including in corners and gutters. If left alone, it can grow under roofing and cause permanent damage. Here’s how to remove moss from metal roofs: 

• Soak the moss to soften it

• Scrub it away with a soft-bristled brush, or pick it off with your hands (be sure to wear gloves)

• Use a moss remover that’s compatible with metal roofing, following the manufacturer’s directions

• Remove dead moss and rinse the roof thoroughly

• Prevent future moss growth by trimming branches, cleaning gutters, and attaching zinc strips to moss-prone areas

Yes, you can, but you’ll need to acquire the right pressure washer tips and cleaning solutions for the job. In particular, you’ll need tips that are capable of lowering the pressure from a max of 3,500 PSI to between 150 and 300 PSI. As for the cleaning solution, look for options that are clearly marked for soft washing rather than pressure washing. 

The best way to clean a roof without damaging it is to opt for soft washing, or better yet, leave it to a professional roof cleaner. Soft washing involves a biodegradable cleaning solution being sprayed on the roof and gently rinsed away after it dissolves built-up residue on your shingles. 

To prep for metal roof painting, have a roof inspection conducted to determine the condition. Complete any repairs required before you paint. Remove the old paint on your metal roof, if any, remove rust and mold with a wire brush, and power wash the surface. Once the roof is clean and dry, start with a primer get painting.