Top-rated structural engineers.

Get matched with top structural engineers in Lewis Run, PA

There are 0 highly-rated local structural engineers.

Need a pro for your structural engineering project in Lewis Run, PA?

Select your specific project to find the pro for you.

Find Structural engineers in Lewis Run

Avatar for NEC Solutions, LLC

NEC Solutions, LLC

504 Juneberry Court
5.00(
10
)
Approved Pro

NEC Solutions, LLC

504 Juneberry Court
5.00(
10
)
Approved Pro
Customers say: Quick response
15 local quotes requested
10 years of experience

NEC Solutions LLC is a licensed Pennsylvania Civil & Structural Engineering firm with over 5 years of experience. (Direct :610-888-9818) We offer complete services for residential and commercial projects, from design to permitting and construction. Civil Services: Soil testing for septic systems, site surveys, contour mapping, stormwater design, and construction layout. Structural Services: New construction design, additions, structural drawings for permits and construction, foundation design/calculations, foundation and deck inspections, evaluations for renovations, solar panel permits with load calculations. Drafting Services: CAD drafting, 3D modeling, quantity takeoffs, permit packages. Permit Services: City of Philadelphia L&I permits, PennDOT HOP permits, full township coordination. We ensure accuracy, code compliance, and professional service on every project. Website: www.necsolutions.us Email: [email protected] Mobile: 610-888-9818

"NEC did good work, turn around time was fast, good experience all around. "

Steve C on June 2025

NEC Solutions LLC is a licensed Pennsylvania Civil & Structural Engineering firm with over 5 years of experience. (Direct :610-888-9818) We offer complete services for residential and commercial projects, from design to permitting and construction. Civil Services: Soil testing for septic systems, site surveys, contour mapping, stormwater design, and construction layout. Structural Services: New construction design, additions, structural drawings for permits and construction, foundation design/calculations, foundation and deck inspections, evaluations for renovations, solar panel permits with load calculations. Drafting Services: CAD drafting, 3D modeling, quantity takeoffs, permit packages. Permit Services: City of Philadelphia L&I permits, PennDOT HOP permits, full township coordination. We ensure accuracy, code compliance, and professional service on every project. Website: www.necsolutions.us Email: [email protected] Mobile: 610-888-9818

"NEC did good work, turn around time was fast, good experience all around. "

Steve C on June 2025



Effective Technical Applications, Inc.

10 Wayne Avenue
No reviews yet

Effective Technical Applications, Inc.

10 Wayne Avenue
No reviews yet
27 years of experience

“ANGIE’S LIST DISCOUNT” – My Angie’s List Clients are given a ten percent (10%) discount on my Fee since Angie’s List does not charge businesses to list their services; therefore, my marketing cost is zero ($0.00) for my Angie’s List Clients. “FINANCING” – Clients are requested to make payment by check with sufficient funds on deposit to cover the check. Should the client be unable to make timely payment then their project is placed on hold until payment is received. The only penalty my Client incurs is loss of schedule, which they control with timely payment. No late fee ($0.00), no interest ($0.00), and no returned check fee ($0.00), is charged. “DESIGN/BUILD SERVICES FINANCING” – The cost of my services (Planning, Design, Engineering, Plans Drafting – CAD, Construction Management, & Inspection) is built into the “Construction Cost”; therefore, my services can be financed over the life of my Client’s mortgage. “EMPLOYEES” – Jonathan A. Snyder is a self-employed Professional Engineer, company of 1 person, who is networked with other qualified designers, engineers, and construction professionals. “PLANS PAYMENT” – Construction Plans are provided on either a “Fixed Fee” or “Not to Exceed Time & Expense” basis, payable in three (3) installments; 1/3 due at “Contract Signing”, 1/3 due at “Planning / Design Review”, 1/3 (or balance) due at “Delivery of Completed Plans”. “DESIGN/BUILD” – “SUB-CONTRACTING” and “PAYMENT”: LABOR – Construction Labor is bid by a minimum of three (3) Sub-contractors; all Bids are reviewed and presented to the Building Owner with recommendation on the “Lowest Qualifying Bid”; the Bid is awarded (Sub-contracted) to the contractor preferred by the Building Owner. MATERIALS – Quotes for all Construction Materials are obtained from a minimum of three (3) suppliers; all Quotes are reviewed and presented to the Building Owner with recommendation on best “Supplier”; Material Purchase Orders are awarded to the supplier preferred by the Building Owner. ENGINEER’S FEE – Engineer’s Fee includes the cost of Planning, Design, Engineering, Plans Drafting (CAD), Construction Management, & Inspection and is provided on a fixed percentage basis of the “Actual Labor & Materials Cost” (“AL&MC”); 1/3 due at contract signing based on the “Estimated Labor & Materials Cost” (“EL&MC”) for the project; the remaining balance is paid at each “Construction Draw” and based on the “AL&MC”. The Engineer’s Fee limit is set at time of contract signing based on the “EL&MC”. The Engineer’s Fee is reduced if the “AL&MC” is less than “EL&MC”; the Engineer’s Fee is not increased if the “AL&MC” is greater than “EL&MC” used at Contract Signing. “CHANGE ORDERS”: MUNICIPAL AUTHORITY OPINION: All “Plans Changes” mandated by the Municipality’s Zoning Officer, Building Code Official, and/or Engineer that are not based on a “Zoning Ordinance, Building Code Ordinance, Land Development Ordinance, Storm Water Management Ordinance, and/or an International Code Council Code (ICC I-Codes) References and are based on the “Reviewing Authority’s Opinion / Preferred Method” are provided on an “Engineering Change Order Basis”. MUNICIPAL AUTHORITY CITED ORDINANCE or STATUTE REFERENCE: All “Plans Changes” mandated by the Municipality’s Zoning Officer, Building Code Official, and/or Engineer that are based on a “Cited Zoning Ordinance, Building Code Ordinance, Land Development Ordinance, Storm Water Management Ordinance, and/or International Code Council Codes (ICC I-Codes) References are provided at no charge to my Client. NO SCOPE CHANGE – All “Plan Changes” within the Contract Scope of Work (i.e. Change a room layout) requested prior to “Final Plans Issue” are provide at no additional charge ($0.00). SCOPE CHANGE – All “Plan Changes” not within the Contract Scope of Work (i.e. Increase in floor area or add an addition to an existing building renovation project) and requested prior to “Final Plans Issue” are provide on an “Engineering Change Order” basis at an additional “Engineering Fee”. CONSTRUCTION CHANGE – All “Plan Changes” requested after “Final Plans Issued” are provided on an “Engineering Change Order” basis at additional “Engineering Fee” plus a “Construction Change Order” is required if either the associated construction “Labor” was sub-contracted or “Materials” were purchased. CONSTRUCTION ERRORS (Failed Inspections) – All “Construction Errors” cited by either the “Municipality’s Inspection Authorities” or the “Engineer of Record” shall be corrected by the Sub-contractor at no cost ($0.00) to my Client. “PLANS FORMAT” – All Plans (Building Shell, Electrical, Floor Plans, Mechanical, Plumbing, Security System, Site, Sprinkler, and Structural) are provided in a format that enables either Jonathan or the Client to self-perform Construction Management (Bidding, Contracting, Change Order Management, and Inspection).

“ANGIE’S LIST DISCOUNT” – My Angie’s List Clients are given a ten percent (10%) discount on my Fee since Angie’s List does not charge businesses to list their services; therefore, my marketing cost is zero ($0.00) for my Angie’s List Clients. “FINANCING” – Clients are requested to make payment by check with sufficient funds on deposit to cover the check. Should the client be unable to make timely payment then their project is placed on hold until payment is received. The only penalty my Client incurs is loss of schedule, which they control with timely payment. No late fee ($0.00), no interest ($0.00), and no returned check fee ($0.00), is charged. “DESIGN/BUILD SERVICES FINANCING” – The cost of my services (Planning, Design, Engineering, Plans Drafting – CAD, Construction Management, & Inspection) is built into the “Construction Cost”; therefore, my services can be financed over the life of my Client’s mortgage. “EMPLOYEES” – Jonathan A. Snyder is a self-employed Professional Engineer, company of 1 person, who is networked with other qualified designers, engineers, and construction professionals. “PLANS PAYMENT” – Construction Plans are provided on either a “Fixed Fee” or “Not to Exceed Time & Expense” basis, payable in three (3) installments; 1/3 due at “Contract Signing”, 1/3 due at “Planning / Design Review”, 1/3 (or balance) due at “Delivery of Completed Plans”. “DESIGN/BUILD” – “SUB-CONTRACTING” and “PAYMENT”: LABOR – Construction Labor is bid by a minimum of three (3) Sub-contractors; all Bids are reviewed and presented to the Building Owner with recommendation on the “Lowest Qualifying Bid”; the Bid is awarded (Sub-contracted) to the contractor preferred by the Building Owner. MATERIALS – Quotes for all Construction Materials are obtained from a minimum of three (3) suppliers; all Quotes are reviewed and presented to the Building Owner with recommendation on best “Supplier”; Material Purchase Orders are awarded to the supplier preferred by the Building Owner. ENGINEER’S FEE – Engineer’s Fee includes the cost of Planning, Design, Engineering, Plans Drafting (CAD), Construction Management, & Inspection and is provided on a fixed percentage basis of the “Actual Labor & Materials Cost” (“AL&MC”); 1/3 due at contract signing based on the “Estimated Labor & Materials Cost” (“EL&MC”) for the project; the remaining balance is paid at each “Construction Draw” and based on the “AL&MC”. The Engineer’s Fee limit is set at time of contract signing based on the “EL&MC”. The Engineer’s Fee is reduced if the “AL&MC” is less than “EL&MC”; the Engineer’s Fee is not increased if the “AL&MC” is greater than “EL&MC” used at Contract Signing. “CHANGE ORDERS”: MUNICIPAL AUTHORITY OPINION: All “Plans Changes” mandated by the Municipality’s Zoning Officer, Building Code Official, and/or Engineer that are not based on a “Zoning Ordinance, Building Code Ordinance, Land Development Ordinance, Storm Water Management Ordinance, and/or an International Code Council Code (ICC I-Codes) References and are based on the “Reviewing Authority’s Opinion / Preferred Method” are provided on an “Engineering Change Order Basis”. MUNICIPAL AUTHORITY CITED ORDINANCE or STATUTE REFERENCE: All “Plans Changes” mandated by the Municipality’s Zoning Officer, Building Code Official, and/or Engineer that are based on a “Cited Zoning Ordinance, Building Code Ordinance, Land Development Ordinance, Storm Water Management Ordinance, and/or International Code Council Codes (ICC I-Codes) References are provided at no charge to my Client. NO SCOPE CHANGE – All “Plan Changes” within the Contract Scope of Work (i.e. Change a room layout) requested prior to “Final Plans Issue” are provide at no additional charge ($0.00). SCOPE CHANGE – All “Plan Changes” not within the Contract Scope of Work (i.e. Increase in floor area or add an addition to an existing building renovation project) and requested prior to “Final Plans Issue” are provide on an “Engineering Change Order” basis at an additional “Engineering Fee”. CONSTRUCTION CHANGE – All “Plan Changes” requested after “Final Plans Issued” are provided on an “Engineering Change Order” basis at additional “Engineering Fee” plus a “Construction Change Order” is required if either the associated construction “Labor” was sub-contracted or “Materials” were purchased. CONSTRUCTION ERRORS (Failed Inspections) – All “Construction Errors” cited by either the “Municipality’s Inspection Authorities” or the “Engineer of Record” shall be corrected by the Sub-contractor at no cost ($0.00) to my Client. “PLANS FORMAT” – All Plans (Building Shell, Electrical, Floor Plans, Mechanical, Plumbing, Security System, Site, Sprinkler, and Structural) are provided in a format that enables either Jonathan or the Client to self-perform Construction Management (Bidding, Contracting, Change Order Management, and Inspection).


kieffer construction

246 Hudsondale St
1.00(
1
)

kieffer construction

246 Hudsondale St
1.00(
1
)
36 years of experience

In business twenty five plus years,we offer very fair prices in todays economy,discounts offered for,senior citizens,military,and return clients.All work done in a timely manner.Satisfaction guaranteed.

In business twenty five plus years,we offer very fair prices in todays economy,discounts offered for,senior citizens,military,and return clients.All work done in a timely manner.Satisfaction guaranteed.


Metal Supermarkets

7120 Golden Ring Road
No reviews yet

Metal Supermarkets

7120 Golden Ring Road
No reviews yet
14 years of experience

Metal Supermarkets is the world’s largest supplier of small quantity metals and offers a number of beneficial features, including:  No minimum order  Over 8,000 metal products, shapes and grades  Unsurpassed Service!  Cut to size  Fast delivery or local pickup I have also attached a line card indicating our metal products and services. Not sure what you need? Our friendly, knowledgeable associates are ready to help. Call us for more information 410-918-0199.

Metal Supermarkets is the world’s largest supplier of small quantity metals and offers a number of beneficial features, including:  No minimum order  Over 8,000 metal products, shapes and grades  Unsurpassed Service!  Cut to size  Fast delivery or local pickup I have also attached a line card indicating our metal products and services. Not sure what you need? Our friendly, knowledgeable associates are ready to help. Call us for more information 410-918-0199.


SMOLEY ENGINEERS & CONSULTANTS

19 N Court St
No reviews yet

SMOLEY ENGINEERS & CONSULTANTS

19 N Court St
No reviews yet
26 years of experience

Multi-faceted planning, engineering and consulting firm, specializing in structural engineering for wood design, masonry, steel & concrete, green design, and wind engineering, serving architects, engineers, contractors, builders, developers, and owners from many business sectors. Practice areas include residential, office, retail, commercial, and industrial markets. Currently licensed as a Professional Engineer in PA, MD, WV, VA, DC, NC, & SC. Member ASCE, SEI, AWC.

Multi-faceted planning, engineering and consulting firm, specializing in structural engineering for wood design, masonry, steel & concrete, green design, and wind engineering, serving architects, engineers, contractors, builders, developers, and owners from many business sectors. Practice areas include residential, office, retail, commercial, and industrial markets. Currently licensed as a Professional Engineer in PA, MD, WV, VA, DC, NC, & SC. Member ASCE, SEI, AWC.


America's Basement Contractor

461 Second St
4.75(
4
)

America's Basement Contractor

461 Second St
4.75(
4
)
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

America's Basement Contractor is your source for basement waterproofing, foundation repair and mold removal in the Pennsylvania and Eastern Ohio. The most important part of your home's structure is it's foundation. Don't let water and mold destroy your home. Stop the destruction early and save money from future destruction with America's Basement Contractor. Toll free call 877-222-4023. Additional email - [email protected].

America's Basement Contractor is your source for basement waterproofing, foundation repair and mold removal in the Pennsylvania and Eastern Ohio. The most important part of your home's structure is it's foundation. Don't let water and mold destroy your home. Stop the destruction early and save money from future destruction with America's Basement Contractor. Toll free call 877-222-4023. Additional email - [email protected].


EHM

Washington Ave.
4.20(
5
)

EHM

Washington Ave.
4.20(
5
)
Customers say: Quick response
71 years of experience

EHM is a structural moving and elevating company that also specializes in foundation repair and replacement. We have been working in the Midwest since the Great Floods of 1993. We specialize in severely comprised foundation issues. We can elevate, level, pier or replace a wall or your entire foundation. We do not do mudjacking, waterproofing or minor crack repair.

"I did not get the service that we originally talked about I am very unhappy"

Donna S on August 2021

EHM is a structural moving and elevating company that also specializes in foundation repair and replacement. We have been working in the Midwest since the Great Floods of 1993. We specialize in severely comprised foundation issues. We can elevate, level, pier or replace a wall or your entire foundation. We do not do mudjacking, waterproofing or minor crack repair.

"I did not get the service that we originally talked about I am very unhappy"

Donna S on August 2021


Mid-Atlantic Waterproofing of PA

52 Grumbacher Rd
4.00(
15
)

Mid-Atlantic Waterproofing of PA

52 Grumbacher Rd
4.00(
15
)
Customers say: Quick response
60 years of experience

Mid-Atlantic Waterproofing has licensed and bonded waterproofing contractors that are fast, efficient and committed to providing you with the best waterproofing services and products that are designed for your specific needs. We begin with a thorough FREE home evaluation that includes the outside of your home when other waterproofing companies only look at the inside. Each of our certified installers is required to undergo extensive training with the latest waterproofing systems and products. Our waterproofing contractors know Pennsylvania state codes and are familiar with the local weather patterns that can plague your home. We understand every aspect of waterproofing when many other waterproofing companies only use one product or system. We are also in the stands cheering on the Steelers and Pirates in Pittsburgh and the Eagles and Phillies in Philadelphia just like you. Mid-Atlantic Waterproofing knows there's more to Pennsylvania than the Liberty Bell, and there's more to waterproofing than patching a leak. Mid-Atlantic Waterproofing has dedicated more than 50 years to perfecting the craft of keeping basements dry. Experts on basement waterproofing and foundation Repair. 800 643 2852 for a free inspection and estimate.

"Job was done well, but now its leaking and the company is gone. So much for the Lifetime Warranty. July 20, 2020 -- Chapter 11 Voluntary Petition for a Non-Individual Small Business . Filed by Robert E Chernicoff of Cunningham and Chernicoff PC on behalf of Mid-Atlantic Systems of CPA, Inc.. (Chernicoff, Robert)"

Jim G on August 2020

Mid-Atlantic Waterproofing has licensed and bonded waterproofing contractors that are fast, efficient and committed to providing you with the best waterproofing services and products that are designed for your specific needs. We begin with a thorough FREE home evaluation that includes the outside of your home when other waterproofing companies only look at the inside. Each of our certified installers is required to undergo extensive training with the latest waterproofing systems and products. Our waterproofing contractors know Pennsylvania state codes and are familiar with the local weather patterns that can plague your home. We understand every aspect of waterproofing when many other waterproofing companies only use one product or system. We are also in the stands cheering on the Steelers and Pirates in Pittsburgh and the Eagles and Phillies in Philadelphia just like you. Mid-Atlantic Waterproofing knows there's more to Pennsylvania than the Liberty Bell, and there's more to waterproofing than patching a leak. Mid-Atlantic Waterproofing has dedicated more than 50 years to perfecting the craft of keeping basements dry. Experts on basement waterproofing and foundation Repair. 800 643 2852 for a free inspection and estimate.

"Job was done well, but now its leaking and the company is gone. So much for the Lifetime Warranty. July 20, 2020 -- Chapter 11 Voluntary Petition for a Non-Individual Small Business . Filed by Robert E Chernicoff of Cunningham and Chernicoff PC on behalf of Mid-Atlantic Systems of CPA, Inc.. (Chernicoff, Robert)"

Jim G on August 2020

Structural Engineering questions, answered by experts

A structural engineer’s report includes a professional assessment of a property’s foundation condition, structural elements like roof trusses and floor joists, and the skeleton of the home, including studs, beams, and rafters. It will also usually include an assessment of drainage on the property and any potential issues that could arise from environmental conditions, like extreme weather in the area and even tree placement.

Yes, water damage can affect your walls' structural integrity. If the water or moisture sits on the walls for an extended period, it can weaken the drywall, plaster, wood framing, and other materials supporting the wall. That's why it's critical to dry out the area as soon as you notice it.

Costs depend on furniture type, size, complexity, and whether additional modifications are needed.

You should pick steel for your new support beam for a few reasons. While steel is more expensive than other materials, such as laminated veneer lumber or glulam, it offers the following benefits:

  • Fire-resistant

  • Unaffected by pests

  • Longer-lasting

  • Stronger against water damage (when galvanized against rust)

Yes, you can build over a stump if the roots are no longer alive. Living roots will continue to grow and may damage your new construction over time. Similarly, you should also remove rotting stumps because they may continue to attract pests and even cause new structures (especially those made from wood) to decompose as well.

By submitting this question, I acknowledge and agree that Angi may publicly display my name, city, state, and question on the website for professionals and others to see.

The Lewis Run, PA homeowners’ guide to structural engineering services

From average costs to expert advice, get all the answers you need to get your job done.