Best sewer cleaners near Florence, OR

Unlike regular cleanings, snaking your sewer line should be done as needed. There’s no reason to snake your sewer line if you don’t have any noticeable issues, like slow drainage or plugged drains. You can add it to your regular sewer cleaning checklist as a prevention method (on the same 18- to 22-month schedule), but it’s not always necessary. 

You could be smelling sewer gas in your kitchen because of a dry P-trap, clogged vent pipe, or leaking plumbing seals. If you smell a rotten egg odor, check your sink’s P-trap and plumbing connections first. A clogged or damaged vent pipe can trap sewer gas and push it back into your kitchen through the plumbing pipes. Loose or deteriorated seals around drainpipes can also allow sewer gas to leak out. If you can’t find the source, call a local plumber for expert help.

Sometimes, the drain is just too clogged—thanks, stubborn hair and soap scum. In this case, you’ll need a more powerful drain cleaner than you can DIY safely at home. But this doesn’t mean you have to choose a traditional drain cleaner. 

You can find biodegradable drain cleaners at your local home improvement store or online for those drains that need a little more oomph. 

While on the hunt for a formidable drain cleaner, the best options are non-chemical clog solutions that combine enzymes and bacteria.

The cost to clean a sewer line is about $370, ranging from about $190 to $550 on average. The specific cleaning method and the problem's severity will impact the project's overall cost. Some of the most common sewer line cleaning methods include:

• Snaking or rodding: $100–$250

• Hydrojetting: $350–$600

• Chemical treatments: $600–$1,000

• Repair or replacement: $1,000–$7,500