Get matched with top woodworkers in Mountain View, OK

Q: How do you cut trim for doorways?

• <div><p>There are two ways you can cut trim for doorways: with a miter saw or a table saw. Mitered joints need a 45-degree angle. If you&rsquo;re unfamiliar with a miter saw, you might want to consider buying extra trim pieces or choosing butted joints instead. One wrong cut, and you&rsquo;ll need to power up the saw again with a new piece. </p><p>Butted joints&mdash;also called shaker style&mdash;don&rsquo;t need a 45-degree angle. Instead, your side pieces attach perpendicularly to the header trim and only require a straight cut.</p></div>

Q: What are the spindles on a deck called?

• <div><p>Spindles on a deck may also be called balusters or pickets. While not as important to the structural support of the deck as the rail posts, they play a critical role in ensuring the deck is safe to use by closing in large gaps in the railing. For this reason, balusters must be no more than 4 inches away from one another.</p></div>

Q: What tools and blades are needed to cut Corian?

• <div><p>Yes, Corian&reg; and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.</p><p>For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.</p><p>After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.</p></div>

Q: Do you need a cutting board on butcher block countertops?

• <div><p>You don&rsquo;t need a cutting board. In fact, cutting is the original purpose of butcher block countertops. That said, wood is porous and can harbor germs. You&rsquo;ll need to clean your countertop thoroughly after use. Knives can also scratch the surface. This adds to the patina of the wood, but not everyone likes the look&mdash;in which case, you may want to use a cutting board.</p></div>

Q: Does a carpenter have to be licensed?

• <div><p>Some states require carpenters to be licensed to perform forms of carpentry, such as framing. The license requires a certain amount of experience and to pass an examination. In states that don&rsquo;t require carpenters to be licensed, they must be licensed as a contractor if they work independently rather than solely as a subcontractor under a licensed builder. Use Angi&rsquo;s <a href="https://www.angi.com/angi-license-check.htm">contractor licensing tool</a> to find out whether a potential carpenter is licensed in your state.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your woodworking project in Mountain View, OK?

Select your specific project to find the pro for you.

Verified Reviews for Woodworking pros in Mountain View, OK

*The Angi rating for Woodworking companies in Mountain View, OK is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

*The HomeAdvisor rating for Woodworking companies in Mountain View, OK is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

Last update on June 10, 2024

Reviewed in June 2024
Very professional and knowledgeable about their work.
AMERICA'S BEST CONTRACTOR AND CONSTRUCTION LLC
Request a quote
Reviewed in May 2024
Every thing is all good
West Shore Home Oklahoma City
Request a quote
Reviewed in November 2020
It was a rocky start but come out excellent! Giant limbs were hoisted down cut up and stacked. Will rehire if they want to come back.
BTR Tree and Lawn Service
Request a quote
Reviewed in March 2020
The employees were courteous friendly and very efficient.
Blue Collar Garage Door, LLC
Request a quote
Reviewed in April 2019
Was really nice affordable and sufficient. Only think I didn t like is he didn t work harder on getting spots/stains out of carpet. Looks better but not as I wanted. Good job though.
Dri Right
Request a quote
Reviewed in April 2016
Great! The girls were friendly, cheerful, and energetic, and fast. They were agreeable to how I wanted things done. I gave an A rating because they have done better than any other cleaners in this area and I have been trying different ones for two years. A few times I saw an area skipped but...
MRS CLEAN MAID SERVICE
Request a quote
Reviewed in March 2014
This is the 2nd time we've used them. Very pleased with the salesman, plumbers, and technician. And very pleased with the results. Not pleased with the price. Their plumbing company, Water Works, came out first. Both plumbers looked professional, were polite, worked efficiently, and cleaned up...
BATH FITTER - BFU197
Request a quote

Find Woodworkers in Mountain View

Sentri Homes

2.9(

)

Carpentry Framing - InstallCustom Cabinets - Build

Serving Mountain View, OK and surrounding areas

Approved

In business since 2023

Free estimates

Emergency services offered

"All the work was on time and to satisfaction! The crew was kind and professional! I would definitely use this company again for all my home improvements!"

20 neighbors recently requested a quote

Request Quote

Duke & Sons Contracting Services LLC

New to Angi

Carport (Wood) - Build

Serving Mountain View, OK and surrounding areas

Approved

In business since 2016

Free estimates

Credit card accepted

Duke & Sons Contracting Services, LLS handles all types of fence installation. Our qualified installers have years of experience in custom built wood fences, vinyl fences, gate installation, and so much more. We complete both residential and commercial projects, offering quality, integrity, professionalism and fairness to every customer we work with. Call us for an estimate today!\n

Request Quote

GP Cabinets & More LLC

New to Angi

Closet - BuildCustom Cabinets - BuildFurniture - Build Custom+4 more

Serving Mountain View, OK and surrounding areas

Approved

Free estimates

Emergency services offered

Warranties offered

At GP Cabinets & More, we bring over 20 years of combined experience in custom cabinetry, finish carpentry, trim work, and residential remodeling. We are committed to delivering exceptional craftsmanship, honest communication, and dependable service on every project. Whether it’s custom cabinets, interior trim, built-ins, or home renovations, we take pride in quality workmanship and attention to every detail. We proudly serve homeowners throughout Oklahoma and are willing to travel for the right project. Our mission is to exceed expectations by completing every job with professionalism, integrity, and lasting quality

Closet - BuildCustom Cabinets - Build

Serving Mountain View, OK and surrounding areas

In business since 1977

Free estimates

Credit card accepted

"AWD went above and beyond to make sure we had exactly what we needed. Their service was excellent. Their cabinets were made on time and of exceptional quality. I would recommend them to anyone."

Recommended by100%of homeowners

Interior Trim and Decorative Moldings - Install

Serving Mountain View, OK and surrounding areas

In business since 2022

Free estimates

Emergency services offered

"Mr. PayneÃ¢Â Â s work was excellent. He listened to what I needed and got the job done! Very nice and professional!! I highly recommend him for any of your projects!!"

Response time3 hrs

Response rate95%

Recommended by100%of homeowners

Closet - BuildCustom Cabinets - BuildFurniture - Build Custom+1 more

Serving Mountain View, OK and surrounding areas

In business since 2017

Free estimates

Warranties offered

"Had to tear apart the door jam in order to get my washer and dryer into my bathroom. It was done with an hour. Work was quality and professional. Absolutely would recommend"

Response time1 hour

Request Quote

Outdoor Creations Roofing

4.7(

)

Carport (Wood) - Build

Serving Mountain View, OK and surrounding areas

In business since 2012

Free estimates

Credit card accepted

"My experience with Outdoor Creations was very positive. The customer service was excellent. I was continually updated by the owner, Jake as to when they were coming to install the roof. The professionalism of this company is very impressive."

Recommended by95%of homeowners

Request Quote

Fineline Construction and Handyman Services

4.0(

440

)

Arbor, Pergola or Trellis - Build CustomArbor, Pergola or Trellis - Build Custom - For BusinessCarpentry Framing - Install+9 more

Serving Mountain View, OK and surrounding areas

In business since 1987

Free estimates

Emergency services offered

"It didn't. I use HandymanMatters of Lewisville."

+31

Recommended by83%of homeowners

Carport (Wood) - Build

Serving Mountain View, OK and surrounding areas

Free estimates

"It was timely and professionally done."

+21

Recommended by100%of homeowners

Request Quote

Community Builders Inc

3.9(

196

)

Arbor, Pergola or Trellis - Build CustomArbor, Pergola or Trellis - Build Custom - For BusinessCarpentry Framing - Install+7 more

Serving Mountain View, OK and surrounding areas

In business since 1982

Free estimates

Warranties offered

"I cannot say enough good things about the installer, Todd. He worked with me to make sure I was satisfied with what I wanted and he kept me updated daily. Todd is very personable, honest, detailed and wants to make sure the job is done right - does not take any shortcuts. When I had questions he explained so I understood. The site was cleaned and tidied up daily."

+10

Recommended by80%of homeowners

Request Quote

...

Showing 1-10 of 66

Woodworking questions, answered by experts

There are two ways you can cut trim for doorways: with a miter saw or a table saw. Mitered joints need a 45-degree angle. If you’re unfamiliar with a miter saw, you might want to consider buying extra trim pieces or choosing butted joints instead. One wrong cut, and you’ll need to power up the saw again with a new piece.

Butted joints—also called shaker style—don’t need a 45-degree angle. Instead, your side pieces attach perpendicularly to the header trim and only require a straight cut.

Spindles on a deck may also be called balusters or pickets. While not as important to the structural support of the deck as the rail posts, they play a critical role in ensuring the deck is safe to use by closing in large gaps in the railing. For this reason, balusters must be no more than 4 inches away from one another.

Yes, Corian® and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.

For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.

After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.

You don’t need a cutting board. In fact, cutting is the original purpose of butcher block countertops. That said, wood is porous and can harbor germs. You’ll need to clean your countertop thoroughly after use. Knives can also scratch the surface. This adds to the patina of the wood, but not everyone likes the look—in which case, you may want to use a cutting board.

Some states require carpenters to be licensed to perform forms of carpentry, such as framing. The license requires a certain amount of experience and to pass an examination. In states that don’t require carpenters to be licensed, they must be licensed as a contractor if they work independently rather than solely as a subcontractor under a licensed builder. Use Angi’s contractor licensing tool to find out whether a potential carpenter is licensed in your state.

The Mountain View, OK homeowners’ guide to woodworking services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
Mar 18, 2026Mar 18, 2026
How Much Do Carpenters Charge Per Hour? [2026 Data]
Find out how much carpenters charge, including average rates, cost factors, and tips to help you budget for your next carpentry project.
René Bennett
•
May 3, 2026May 3, 2026
How Much Does a Cord of Wood Cost? [2026 Data]
Whether you need to heat your home for the winter or simply enjoy lighting a fire occasionally, it's helpful to know the cost of a cord of wood in your area.
Angi
•
Aug 17, 2026Aug 17, 2026
Built-In Bookshelf Building: Everything You Need to Know
Want to upgrade your home with custom shelving? Learn about built-in bookshelf building costs, design options, and how to hire a local carpentry pro.
Audrey Bruno
•
Aug 1, 2026Aug 1, 2026
10 Creative Projects You Can Make with Garden Scrap Wood
It’s not uncommon to have scrap wood lying around your garden, but there are plenty of creative projects that will help you give those spares a second life.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Bookshelf Building Pro
Learn how to hire a bookshelf building pro with expert tips on finding qualified carpenters, asking the right questions, and getting quality custom shelving.
Kristin Salaky
•
Aug 4, 2026Aug 4, 2026
How to Choose the Right Sandpaper Grit for Your Project
Sandpaper has a plethora of uses, which is why there are so many options. Learn about the various sandpaper grits to choose the right grit for the project.