Best granite restoration pros near Nova, OH

To properly maintain natural stone surfaces, use pH-neutral cleaners for regular cleaning and avoid acidic substances that can cause damage or etching. It is also important to reseal the surfaces periodically, especially for porous stones, to protect the finish, maintain appearance, and ensure longevity.

The frequency for sealing granite countertops depends on several factors, including the type of sealant used, the color of the granite, and how heavily the countertops are used. As a general guideline, resealing is often recommended every 12 to 18 months, but some sources suggest it could be as often as every few months or at least once a year.

The type of sealant is a major factor: water-based sealants may need reapplication every six months to a year, while more durable solvent-based sealants can last for five to 10 years. Additionally, factors like heavy kitchen traffic, frequent use of acidic cleaners, and lighter granite colors may require more frequent sealing to prevent staining.

To determine if your countertops need resealing, you can perform a simple water test. Place a few drops of water or a wet paper towel on an inconspicuous area of the granite. After 10 to 15 minutes, check the spot. If the water has beaded up, the seal is still intact. If the water has been absorbed and darkened the stone, it's time to apply a new coat of sealant. You can choose to seal the granite yourself or hire a professional to ensure it's done correctly.

Use pH-neutral cleaners specifically designed for stone surfaces to clean granite or marble. Avoid acidic or abrasive cleaners that can damage the sealant or the stone itself. Regular re-sealing helps protect the surface from stains and damage.

Yes, it is possible to buff and polish your floors yourself, particularly for smaller areas. However, this is considered an intermediate-level DIY project that is time-consuming and requires patience and know-how. The process involves cleaning the floors before applying a polish, which can be done manually with a cloth or with a rented or purchased floor buffer and buffing solution. If not done correctly, you risk leaving burn-like marks, puddles, or an uneven finish, which could lead to costly repairs. For larger spaces or to ensure a professional result, hiring a professional is often worthwhile. They use industrial equipment to complete the job faster, providing a deep clean and a more even, polished finish without damaging your floors.