Get matched with top door pros in Malvern, OH

Barn doors do not always require a bottom track, especially if a high-quality top track is used to stabilize the door. However, a bottom track is often recommended to ensure the door operates smoothly, prevent it from scratching the floor, and keep it from pushing inward or outward, which could cause damage. A bottom track also keeps the door more secure and properly anchored. In some cases, an interior barn door can hang solely from a top track without a bottom guide. If you do install a bottom track, it should be placed six to eight inches from the floor and be at least twice as wide as the door.

Outswing doors are more popular for exterior doors as they offer more room for moving items in and out of a home. And because the hinges are on the outside of the door, they’re more secure against potential break-ins. But, outswing doors are more susceptible to the elements and are more expensive. Comparing inswing vs. outswing doors depends on your budget, needs, and overall preference.

WD-40 can be used on squeaky door hinges, but it is generally considered a temporary, short-term solution rather than a long-term fix. While it can silence a squeak in a pinch by breaking down rust and grime, it is not a true lubricant, as it contains only a small amount of lubricating oil that evaporates quickly. Using WD-40 alone may lead to the squeak returning and can attract dirt and dust, potentially causing more wear on the hinge over time. For a more effective and lasting solution, it is recommended to first use WD-40 to clean the hinge, then wipe it clean. Afterward, apply a dedicated lubricant such as silicone spray, white lithium grease, a metal or plastic lubricant, or an oil-based product like petroleum jelly.

You can use a variety of wood to build a barn door, but the most common options include 1-by boards and 2-by boards for the backing and the decorative boards on the front of the door. Softwoods like pine will save you some money and should hold up well, while hardwoods like maple and oak will stand up to more wear and tear. You could also build the backer out of plywood to minimize the cuts you need to make. Whatever you decide on, make sure the width of the wood is compatible with the mounting brackets you buy.