Get matched with top woodworkers in Fayette, OH

Q: Are ceiling joists load-bearing?

• <div><p>Yes, ceiling joists are typically load-bearing. However, their primary function is to support the weight of the ceiling and loads applied to it, like lighting fixtures and ceiling fans. They can also help support the roof, especially if they&rsquo;re part of truss systems. Remember, the load-bearing capacity of ceiling joists depends on the material, size, and space between them. </p></div>

Q: How much do floor joists cost?

• <div><p>If you&rsquo;re just replacing a few broken or damaged joists, you can expect to pay anywhere from $100 to $300 per joist. However, a complete installation for a home or room will take into account the cost of labor, which ranges from $25 to $40 per hour. Floor joist installation for an entire room, for example, can cost between $5,000 and $10,000, depending on the room's size and the materials used. </p></div>

Q: Should you tip a carpenter?

• <div><p>No, you do not usually tip a carpenter for their work. However, if you&rsquo;ve been very happy with the level of service and quality of work, a 10% to 20% tip would likely be accepted with thanks. If you&rsquo;re not sure, it can help to discuss the carpenter&rsquo;s policy or preference for tipping before beginning the project.</p></div>

Q: Is it okay to drill into a load-bearing beam?

• <div><p>You should avoid drilling or cutting into load-bearing beams because removing material will weaken it and increase the risk of structural damage or even collapse. If you do need to drill into a load-bearing beam, speak with a structural engineer first to discuss where it&rsquo;s safest to drill and the width and depth of the bit that&rsquo;s safe to use.</p></div>

Q: What tools and blades are recommended for cutting Corian?

• <div><p>Yes, Corian&reg; and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.</p><p>The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.</p><p>It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.</p><p>Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your woodworking project in Fayette, OH?

Select your specific project to find the pro for you.

Verified Reviews for Woodworking pros in Fayette, OH

*The Angi rating for Woodworking companies in Fayette, OH is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

*The HomeAdvisor rating for Woodworking companies in Fayette, OH is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

Last update on November 21, 2025

Reviewed in November 2025
DJ and the team built me a nice wooden deck! They were professional and very easy to work with. Very transparent guys and work with you every step of the way so you get exactly what you want. I highly recommend these guys if you want a deck built by some genuine and honest builders. They do...
Kountryboy Konstruction
Request a quote
Reviewed in October 2025
Had a fence project. They did exactly what they said was able to adjust schedule as needed for me. Great job overall
Midwest Dynamic Renovations, LLC
Request a quote
Reviewed in December 2024
Very satisfied with there work! The crew was professional,knowledgeable, and quick. They had great attitude ,preparation was on point(have hardwood floors that were covered), and cut lines were straight. Would hire again.
C/3 Home Solutions
Request a quote
Reviewed in June 2024
Excellent. The guys from Hamden Roofing were prompt and courteous. They did a phenomenal job putting a steel roof on our house and barn that matched the steel roof o my wife’s she shed.
Hamdan Quality Roofing LLC
Request a quote
Reviewed in May 2024
Very knowledgeable and professional. Easy to work with. Won't hesitate to call again for any future tree services.
Milks Tree Service Inc
Request a quote
Reviewed in March 2024
Also had a pole barn put up, great job. Had shingle roof removed and installed on our old house. As with the metal roof job done on our current home, both yards were left clean when the jobs were done. The team was very courteous.
Honey-Do List Handyman Husband's Best Friend LLC
Request a quote
Reviewed in November 2023
This young lady and her crew did an excellent job on my house. It was vandalized and I thought it was beyond repair. She said it was no problem and then proved herself to me. I highly recommend this company to anyone who needs help with Sheetrock or other repairs. The price was within range and...
Wall to Wall
Request a quote
Reviewed in March 2023
El-Jon Painting did great work for me and I highly recommend them
El-Jon Painting
Request a quote
Reviewed in February 2023
Scott has a lot of experience and a wealth of knowledge when it comes to construction. He is very creative and does some great custom work, and has a great pride in what he does.
The Scottsman, LLC
Request a quote
Reviewed in December 2022
He was great to work with. He navigated the design process very welll. He is very good at resolving design problems, fitting things in certain spaces. He is very knowledgerable about the building process, and very good at maxizmizing so there is no waste.
Lance Wyse, Architect
Request a quote

Find Woodworkers in Fayette

CSG Specialty Fabrication

5.0(

)

Arbor, Pergola or Trellis - Build CustomArbor, Pergola or Trellis - Build Custom - For BusinessCarpentry Framing - Install+3 more

Serving Fayette, OH and surrounding areas

Approved

In business since 1997

Free estimates

Credit card accepted

"They came to work when they said they were and stayed until the job was finished. They were pleasant, courteous, professional and cleaned up all leftover debris. I am so pleased with my finished product."

+47

Response time1 day

Recommended by100%of homeowners

Carpentry Framing - InstallCustom Cabinets - Build

Serving Fayette, OH and surrounding areas

Approved

In business since 2023

Free estimates

Emergency services offered

"I was very impressed with Sentri Homes - their customer service was excellent. They sent a subcontractor to install some vinyl laminate in my bathroom and he ended up getting glue all over the carpet in our bedroom. The sub ended up ghosting both me and Sentri, leaving me stuck with a ruined carpet. Sentri stuck with me for over a month to get the carpet replaced with the identical original and to get the vinyl job 100% completed. The carpet was a Home Depot exclusive and Sentri handled everything with them. I will be using Sentri for a much bigger renovation I have coming up soon, because I know that they will make sure everything gets done right no matter what problems come up. The vinyl looks great too."

25 neighbors recently requested a quote

Interior Trim and Decorative Moldings - InstallInterior Trim and Decorative Moldings - Repair

Serving Fayette, OH and surrounding areas

Approved

In business since 2024

Free estimates

Customers say: Quick response

It is our mission to provide the highest quality of service in all aspects of our business. We are extremely thorough with the services that we provide and aim to be most receptive to any issues, questions or concerns that you may have and we handle the concern promptly and professionally. We take All the necessary steps to ensure that our clients are completely satisfied with all of our contractual and assumed responsibilities. Most Importantly, we will fulfill these responsibilities while maintaining the highest ethical standards with our work and our character. Call us today!\n

Response time3 days

Response rate90%

5 neighbors recently requested a quote

Request Quote

Michael Gary Ottenbacher

New to Angi

Carpentry Framing - InstallInterior Trim and Decorative Moldings - Install

Serving Fayette, OH and surrounding areas

Approved

In business since 2015

Free estimates

Credit card accepted

We pride our company on reliability, great communication, integrity, and quality work. We are experts in our trade and will do our best to keep you as educated as we can on your particular task or project. We look forward to earning your business! Book with us online or feel free to give us a call today!

+22

Response time2 days

Response rate89%

Request Quote

Vouis Trim Carpentry L.L.C.

4.9(

)

Wood Stairs and Railings - Install or Replace

Serving Fayette, OH and surrounding areas

In business since 2022

Free estimates

Credit card accepted

"I Mr Vouis professional manner,no job to small or big in his craft a willingness to respond to the need and well being of my home when we needed help in a most desperate way Mr Vouis put our family needs first so we could be safe in our home and children. I will forever be grateful also for the beautiful set of stairs and the quality it will add to our home what a wonderful investment I am so satisfied with the work and craftmanship he provided to us ."

Closet - BuildCustom Cabinets - Build

Serving Fayette, OH and surrounding areas

In business since 1977

Free estimates

Credit card accepted

"AWD went above and beyond to make sure we had exactly what we needed. Their service was excellent. Their cabinets were made on time and of exceptional quality. I would recommend them to anyone."

Recommended by100%of homeowners

Request Quote

Dunn Right Roofing and Decks

5.0(

)

Arbor, Pergola or Trellis - Build CustomArbor, Pergola or Trellis - Build Custom - For BusinessCarpentry Framing - Install+7 more

Serving Fayette, OH and surrounding areas

In business since 1996

Free estimates

Emergency services offered

"Great job! Updated our roof from shingles to metal. It looks fantastic!"

+20

Recommended by100%of homeowners

Request Quote

Kountryboy Konstruction

5.0(

)

Arbor, Pergola or Trellis - Build Custom

Serving Fayette, OH and surrounding areas

In business since 2025

Free estimates

Offers commercial services

"DJ and the team built me a nice wooden deck! They were professional and very easy to work with. Very transparent guys and work with you every step of the way so you get exactly what you want. I highly recommend these guys if you want a deck built by some genuine and honest builders. They do great work!"

+12

Response time4 hrs

Response rate100%

Furniture - Build Custom

Serving Fayette, OH and surrounding areas

In business since 2006

Credit card accepted

"I never contacted the provider or used this service in anyway. I have to
write this review so that the request to write this review stops
popping up.
The rating is bogus as it is required to be able to submit.
"

California Client Saves with HMD Designer Discounts

Recommended by54%of homeowners

Arbor, Pergola or Trellis - Build CustomArbor, Pergola or Trellis - Build Custom - For BusinessCarpentry Framing - Install+8 more

Serving Fayette, OH and surrounding areas

In business since 2019

Credit card accepted

"Very professional and high quality work."

(2) 5’ wide by 9’ tall twin built-ins. Bar cart to fill the space in between.

+20

Recommended by100%of homeowners

Request Quote

...

Showing 1-10 of 66

Woodworking questions, answered by experts

Yes, ceiling joists are typically load-bearing. However, their primary function is to support the weight of the ceiling and loads applied to it, like lighting fixtures and ceiling fans. They can also help support the roof, especially if they’re part of truss systems. Remember, the load-bearing capacity of ceiling joists depends on the material, size, and space between them.

If you’re just replacing a few broken or damaged joists, you can expect to pay anywhere from $100 to $300 per joist. However, a complete installation for a home or room will take into account the cost of labor, which ranges from $25 to $40 per hour. Floor joist installation for an entire room, for example, can cost between $5,000 and $10,000, depending on the room's size and the materials used.

No, you do not usually tip a carpenter for their work. However, if you’ve been very happy with the level of service and quality of work, a 10% to 20% tip would likely be accepted with thanks. If you’re not sure, it can help to discuss the carpenter’s policy or preference for tipping before beginning the project.

You should avoid drilling or cutting into load-bearing beams because removing material will weaken it and increase the risk of structural damage or even collapse. If you do need to drill into a load-bearing beam, speak with a structural engineer first to discuss where it’s safest to drill and the width and depth of the bit that’s safe to use.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

The Fayette, OH homeowners’ guide to woodworking services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
Mar 18, 2026Mar 18, 2026
How Much Do Carpenters Charge Per Hour? [2026 Data]
Find out how much carpenters charge, including average rates, cost factors, and tips to help you budget for your next carpentry project.
Lauren Bongard
•
Jul 9, 2026Jul 9, 2026
How Much Does It Cost to Refinish Stairs? [2026 Data]
Refinishing stairs is a great way to spruce up one of a home's most dominant focal points. High-quality wood should be allowed to shine. Learn the cost to refinish stairs in this guide.
Audrey Bruno
•
Jul 9, 2026Jul 9, 2026
10 Creative Projects You Can Make with Garden Scrap Wood
It’s not uncommon to have scrap wood lying around your garden, but there are plenty of creative projects that will help you give those spares a second life.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Bookshelf Building Pro
Learn how to hire a bookshelf building pro with expert tips on finding qualified carpenters, asking the right questions, and getting quality custom shelving.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Wood Stair Installation Contractor
Looking to hire a pro for wood stair installation? Learn how to find qualified contractors, questions to ask, and what to expect for your project.
Kristin Salaky
•
May 21, 2026May 21, 2026
How to Choose the Right Sandpaper Grit for Your Project
Sandpaper has a plethora of uses, which is why there are so many options. Learn about the various sandpaper grits to choose the right grit for the project.