Get matched with top interior painters in Warwick, NY

Yes, you can pressure wash epoxy floors, but you must take precautions to avoid damaging the surface. While most epoxy floors can be cleaned with a mop, you might choose to pressure wash if the floor is stained, has ground-in dirt, or is covered with mold or mildew. To do so safely, first soak any stains or dirty areas with a gentle cleanser. Use a lower pressure setting with a gentle nozzle, such as a green, white, or black tip, or a 45-degree angled tip. Keep the spray nozzle at least 18 inches away from the floor to protect the surface. Using a surface cleaner attachment or a rotary scrubber can also help prevent overspray. Be cautious if using a power washer that heats the water, as the combination of heat and pressure may be too powerful and could damage the epoxy coating.

Yes, you can paint over old exterior paint, but success depends on the condition of the existing paint and proper surface preparation. If the previous coating is in good shape (not cracked, peeling, or flaky), you can paint over it with less prep work. However, for the most durable and professional-looking results, follow these key preparation steps:

• Clean the Surface: Thoroughly clean the exterior to remove all dirt, grime, and mildew. A pressure washer can be very effective for this.

• Scrape and Sand: If the old paint is peeling, cracked, or flaky, you must scrape off all loose paint. After scraping, sand the surface to create a smooth, even base for the new paint. Sanding is especially important for wood siding.

• Apply Primer: Using a quality exterior primer is highly recommended. It ensures the new paint adheres properly, improves durability, and provides a uniform finish. If you are painting a lighter color over a dark one, a tinted primer will help cover the old color more effectively.

Some brands offer paint-and-primer-in-one products for convenience. Taking the time to prepare the surface properly will not only increase your home's curb appeal but also help protect your siding and extend its life.

This factor depends on exactly how much paint you remove from your hardwood floors. If it’s just a few small, hardly noticeable spots, refinishing won’t be necessary. However, if you completely strip your floors of paint, you will likely need to sand and finish them. 

Penetrating sealer seeps into concrete pores to protect it from moisture and staining, cracking, and mold caused by water. This means you cannot remove penetrating sealers like topical sealers. The good news is that penetrating sealant doesn’t have to be removed before resealing, as most topical sealers must. Instead, you’ll want to buy a compatible penetrating sealant (often the same kind already in the concrete) and apply it. Always follow the manufacturer’s instructions.