Best concrete resurfacing pros near Old Forge, NY

Concrete resurfacing and concrete overlay are terms often used interchangeably to describe the process of applying a new, thin layer of pre-blended concrete over an existing slab. This process enhances the durability and appearance of the concrete, giving it a fresh look without the high cost of a full replacement. The new layer is typically between 1/4-inch and 1-inch thick, significantly less than the 4 inches required for a new slab, and can be stamped, colored, or textured for a custom finish.

While the terms are often considered the same, their meaning can sometimes vary by contractor. Some may use "overlay" to describe a thicker application that adds structural integrity, while "resurfacing" might refer to a thinner layer intended for cosmetic upgrades. Other common names for this process include concrete restoration, concrete refinishing, and concrete rejuvenation.

A concrete overlay is often the most cost-effective way to resurface a pool deck. To do this, you’ll need to pour a thin layer of concrete over the existing pool deck, which you can customize by stamping or painting. A stamped concrete overlay provides additional traction on a pool deck that can help minimize the risk of people slipping and falling.

No, hairline cracks in concrete are generally not a problem as they do not impact the strength and longevity of the concrete. Generally, cracks less than 0.3 millimeter wide don’t impact the structure. Hairline cracks can grow over time and weaken the structure, such as in a home foundation. Some hairline cracks can also cause leaks in a foundation. It’s important to watch the cracks to see if they grow. Contact a concrete contractor if you notice cracks exceeding 0.3 millimeter wide.

Yes—as long as the area has been properly prepped. Different self-leveling brands and compounds have their own specific instructions for preparation; some may require that you add primer or grind the surface. Without proper preparation of the surface, the compound will not be able to fully bond to the concrete and fill the cure as a separate layer, which makes it prone to chipping.