Best concrete driveway pros near Gowanda, NY

Experts typically recommend pressure washing your driveway at least once per year to keep it looking great while preventing stains, cracks, and unwanted vegetation. However, if your driveway gets a lot of use, you might want to pressure wash it more often to keep it looking like new. 

Pressure washing your home or fence can make a major difference in the appearance and may even help extend the life of the structure you’re cleaning. Some of the most common areas that people pressure wash around their property include:

• Driveway: $100–$250

• Patio: $100–$200

• Fence: $150–$300

• Gutters: $50–$150

• Roof: $450–$700

• Siding: $150–$1,400

• One-story house: $150–$750

• Two-story house: $400–$1,400

• Three-story house: $700–$1,800

Yes, you can pressure wash epoxy floors, but you must take precautions to avoid damaging the surface. While most epoxy floors can be cleaned with a mop, you might choose to pressure wash if the floor is stained, has ground-in dirt, or is covered with mold or mildew. To do so safely, first soak any stains or dirty areas with a gentle cleanser. Use a lower pressure setting with a gentle nozzle, such as a green, white, or black tip, or a 45-degree angled tip. Keep the spray nozzle at least 18 inches away from the floor to protect the surface. Using a surface cleaner attachment or a rotary scrubber can also help prevent overspray. Be cautious if using a power washer that heats the water, as the combination of heat and pressure may be too powerful and could damage the epoxy coating.

If your epoxy application ended up a bit messy and left spills behind, there are several ways to clean epoxy off of a concrete floor. You can use a power washer with at least 3,000 PSI. However, it may be easier to use a scraping tool or an acidic cleaner, like vinegar, to remove unwanted epoxy. 

If the entire floor has epoxy and you want to remove just excess epoxy stains, these methods could still strip parts of the epoxy floor. Move carefully and in small areas to minimize damage, or call a pro for an expert finish.