Get matched with top door pros in Garnerville, NY

Sometimes, these two terms are used interchangeably, but they are separate parts of a door, and each serves a different function. The sill helps ensure the doorframe is secure, and the threshold helps protect the sill and direct water away from the door to prevent leaks.

Ideally, a gate should be able to swing both in and out. However, if it can only open in one direction, it is generally best for it to swing inward. This is often the safest option, especially for deck gates near steps, as you'll want the gate to swing away from the stairs. An inward swing also prevents the gate from opening into a public space, like a sidewalk, and can be more convenient when carrying heavy items like a wheelbarrow into a garden.

There are exceptions, however. The layout of your property may require a different approach. For example, if your property is on a slope, the gate may not be able to swing inward. You should also ensure the gate can open fully without colliding with any objects or blocking access to other areas. For a backyard garden gate where public access isn't a concern, the direction it swings is largely a matter of personal preference. Finally, always check your local building codes, as they may have specific requirements for which way a gate must swing.

No, exterior doors don’t need to be prehung, although choosing a door that is prehung makes the installation process far easier. Installing an exterior door that isn’t prehung requires carefully maneuvering the heavy door into place in your door frame, making sure it’s level and plumb on all sides, and then attaching the hinges so that they’re perfectly level and are affixed to the right part of your frame and door. Prehung exterior doors are far more DIY-friendly.

If you took measurements of the door and can’t find the correct size in the store, you may need a custom-size screen door. Many door manufacturers produce doors fit-to-size using individualized dimensions. Another option, if the door opening is smaller than standard, is to have the door frame opening cut larger to accommodate a standard-sized door.