Get matched with top pavers and hardscaping pros in Mcdermitt, NV

It’s far more labor-intensive and expensive to demolish a concrete slab before laying down pavers. You’ll need a professional to break up and haul away the concrete, excavate underneath, bring in paver base or crushed gravel, and then level the area with leveling sand before laying the pavers. A new paver patio will cost around $1,000 to $2,000, which is more than laying pavers over a concrete patio, and takes longer to complete.

While water-related pressure caused by poor drainage is one common cause of paver cracking, other factors can include ground movement beneath pavers, heavy loads and wear and tear over the pavers, and climates with constant freeze-thaw cycles. In general, pavers should be resealed every three to five years to prevent cracking.

You can use regular sand as the base for your pavers and in between pavers to seal the joints. Many pros reach for polymeric sand, also known as all-purpose sand, because it has been sifted and washed to remove impurities. But you can easily level ground and fill gaps between pavers for a clean look using regular sand, sometimes at a lower cost.

An example of permeable paving is a set of cinder blocks or natural stone pavers with room inside for natural materials, such as gravel, sand, or grass. You can also design these pavers with brick or plastic tiles.

In addition to these pavers, permeable pavement can be obtained by using a highly porous material, such as pervious concrete or pervious asphalt.