Get matched with top woodworkers in Ely, NV

Q: Do contractors charge for meetings?

• <div><p>Most contractors do not charge for meetings, but it can depend on the project, mainly if it includes detailed consultations or project planning. For general estimates, homeowners shouldn't expect to be charged. Always ask up front about meeting fees to avoid surprises and ensure you know what&rsquo;s included in the process.</p></div>

Q: Do you need a cutting board on butcher block countertops?

• <div><p>You don&rsquo;t need a cutting board. In fact, cutting is the original purpose of butcher block countertops. That said, wood is porous and can harbor germs. You&rsquo;ll need to clean your countertop thoroughly after use. Knives can also scratch the surface. This adds to the patina of the wood, but not everyone likes the look&mdash;in which case, you may want to use a cutting board.</p></div>

Q: What tools and blades are needed to cut Corian?

• <div><p>Yes, Corian&reg; and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.</p><p>For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.</p><p>After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.</p></div>

Q: Is it okay to drill into a load-bearing beam?

• <div><p>You should avoid drilling or cutting into load-bearing beams because removing material will weaken it and increase the risk of structural damage or even collapse. If you do need to drill into a load-bearing beam, speak with a structural engineer first to discuss where it&rsquo;s safest to drill and the width and depth of the bit that&rsquo;s safe to use.</p></div>

Q: Why do general contractors use subcontractors?

• <div><p>General contractors use subcontractors to complete specific parts of a construction project. For example, a general contractor might have construction experience but need a subcontractor to install plumbing lines in a new home.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your woodworking project in Ely, NV?

Select your specific project to find the pro for you.

Verified Reviews for Woodworking pros in Ely, NV

*The Angi rating for Woodworking companies in Ely, NV is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

*The HomeAdvisor rating for Woodworking companies in Ely, NV is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

Last update on August 02, 2025

Reviewed in August 2025
TC completed several projects for my husband and me. The first project was a trex deck front porch with awning and wheel chair ramp. He also completed 3 bathroom remodel. All of our projects turned out great. He has an eye for detail and is very professional. I recommend TC to complete your...
Freedom Home Repair & Construction LLC
Request a quote
Reviewed in June 2025
Home Design Construction was a great choice for our bathroom and kitchen remodel. We got a good feeling about Eran from our first meeting and he did not disappoint. We felt comfortable through the whole process because Eran and his team helped us every step of the way. He helped us pick out...
Home Design Construction, Corp.
Request a quote
Reviewed in December 2024
LG tree service did a great job for us, removing a huge tree that was encroaching/threatening a house and cutting up the large trunk for steps. The work was remarkably quick and my yard was left in perfect condition. They have quite a team. Highly recommend.
LG Tree Services
Request a quote
Reviewed in May 2023
Fast, efficient, professional, and clean, with added character that provided a few laughs. Thanks 007Air Llc!
007 Air, LLC
Request a quote
Reviewed in October 2022
the team worked fast and thorough to mitigate the spider web infection.
HiLow Services, LLC
Request a quote
Reviewed in September 2022
The work was excellent. They were proficient, nice, professional, awesome, and I would recommend them anybody.
Cazares Contractor Services
Request a quote

Find Woodworkers in Ely

Sentri Homes

2.3(

)

Serving Ely, NV and surrounding areas

Approved

In business since 2023

Free estimates

Emergency services offered

"Found Sentri on Angi. Jeanette and Violet were very pleasant and efficient in getting a contractor to me in the time frame needed. The contractor was excellent and the roof looks great! I would definitely work with them again if I had additional projects."

29 neighbors recently requested a quote

Serving Ely, NV and surrounding areas

In business since 1977

Free estimates

Credit card accepted

"quality is always excellent. Delivery has always been on time. this is the third time I have used Arkansas wood door"

Recommended by100%of homeowners

Request Quote

Duro Beam Pre-Fabricated Steel Buildings

4.8(

)

Serving Ely, NV and surrounding areas

Free estimates

Credit card accepted

"Very good I made a telephone call and spoke to Mr. Shore and the parts that I requested was shipped immediately."

+19

Recommended by100%of homeowners

Request Quote

WorkWithMeNotAgainstMe

4.8(

)

Serving Ely, NV and surrounding areas

In business since 2018

Free estimates

"These guys were great!! We had a delivery of a massive new front, all in one piece, very heavy. They handled it of total care and stored it in our garage with all the very long trim pieces for installation next day. Kind of an unusual item to deliver so was concerned about the glass, scratching, damage. Again, 5-star handling and very pleased!!"

+15

Recommended by80%of homeowners

Serving Ely, NV and surrounding areas

In business since 2008

Emergency services offered

Credit card accepted

"Very good , efficient clean work"

Recommended by82%of homeowners

Request Quote

American Home Shield – Home Warranty

3.5(

5,688

)

Serving Ely, NV and surrounding areas

In business since 1971

Credit card accepted

"The companies they use are very good and professional."

Recommended by65%of homeowners

Request Quote

Vortex Filtration Inc

5.0(

)

Serving Ely, NV and surrounding areas

In business since 2000

Free estimates

Emergency services offered

Vortex Filtration is a well water storage tank filtration system. "WE DONOT SERVICE WELLS & PUMPS, WE ADD FILTERATION TO WELLS & PUMPS, TO CLEAN WATER AND STORAGE TANKS, ALLOWING YOUR WATER TO BE CLEANER THAN A SWIMMING POOL!". Our systems go into storage tanks with a minimum of 2,000 gallons and up. \n\nIf you are having trouble with clogged filters, dirty water, water heater problems, iron and mineral stains in your toilets and other well water storage tank issues, call us to see what we can do for you. \n\nWe keep well water storage tanks crystal clear and your water system trouble free.

Recommended by100%of homeowners

Request Quote

Hampton Enterprise LLC

3.7(

)

Serving Ely, NV and surrounding areas

In business since 1989

Free estimates

Emergency services offered

"They did a very good job. They were quick and I am very happy with the work that they did for me."

Recommended by60%of homeowners

Serving Ely, NV and surrounding areas

"The work was great. They were very efficient, did it in a timely manner, professional, courteous, and polite."

Recommended by100%of homeowners

Serving Ely, NV and surrounding areas

In business since 2012

Free estimates

Credit card accepted

Ernz Painting is dedicated to providing our customers with the best quality and craftsmanship. We are here to build relationships with our customers and communities. No job is too big or too small! We look forward to working with you!

Response time30 mins

Request Quote

Showing 1-10 of 15

Woodworking questions, answered by experts

Most contractors do not charge for meetings, but it can depend on the project, mainly if it includes detailed consultations or project planning. For general estimates, homeowners shouldn't expect to be charged. Always ask up front about meeting fees to avoid surprises and ensure you know what’s included in the process.

You don’t need a cutting board. In fact, cutting is the original purpose of butcher block countertops. That said, wood is porous and can harbor germs. You’ll need to clean your countertop thoroughly after use. Knives can also scratch the surface. This adds to the patina of the wood, but not everyone likes the look—in which case, you may want to use a cutting board.

Yes, Corian® and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.

For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.

After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.

You should avoid drilling or cutting into load-bearing beams because removing material will weaken it and increase the risk of structural damage or even collapse. If you do need to drill into a load-bearing beam, speak with a structural engineer first to discuss where it’s safest to drill and the width and depth of the bit that’s safe to use.

General contractors use subcontractors to complete specific parts of a construction project. For example, a general contractor might have construction experience but need a subcontractor to install plumbing lines in a new home.

The Ely, NV homeowners’ guide to woodworking services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Lauren Bongard
•
May 30, 2026May 30, 2026
How Much Does It Cost to Refinish Stairs? [2026 Data]
Refinishing stairs is a great way to spruce up one of a home's most dominant focal points. High-quality wood should be allowed to shine. Learn the cost to refinish stairs in this guide.
Angi
•
Mar 18, 2026Mar 18, 2026
How Much Do Carpenters Charge Per Hour? [2026 Data]
Find out how much carpenters charge, including average rates, cost factors, and tips to help you budget for your next carpentry project.
Angi
•
May 21, 2026May 21, 2026
Who to Hire for Wall Paneling Installation
Not sure who to hire for wall paneling installation? Compare pros, understand the process, and get confident tips to choose the right expert.
Audrey Bruno
•
May 22, 2026May 22, 2026
10 Creative Projects You Can Make with Garden Scrap Wood
It’s not uncommon to have scrap wood lying around your garden, but there are plenty of creative projects that will help you give those spares a second life.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Wood Stair Installation Contractor
Looking to hire a pro for wood stair installation? Learn how to find qualified contractors, questions to ask, and what to expect for your project.
Amber Guetebier
•
May 22, 2026May 22, 2026
15 Reclaimed Barn Wood Decor Ideas to Add Rustic Charm to Your Home
Whether it’s rustic barn wood furniture or you love the reclaimed wood look, these barn wood home decor and wood projects will add instant personality to any home.