Get matched with top marble restoration pros in Ely, NV

No, you cannot use vinegar to polish marble. It is too acidic for cleaning or polishing and can etch the surface. Instead, opt for non-acidic cleaners made specifically for marble. Follow the manufacturer’s directions to ensure proper application and to protect the marble. However, a damp mop can be an effective marble cleaner when used appropriately and as long as moisture is immediately soaked up.

Cracks are usually repaired using an epoxy filler that matches the countertop's color. The area is cleaned, the epoxy applied, and then polished to blend with the surface, restoring both strength and appearance.

You can’t change the color of the stone, but you can update granite countertops without replacing them by painting them. Because granite is a porous material, you’ll want to seal them first before painting them so that the paint doesn’t hurt the surface. This is important because you don’t want to devalue your counters by damaging the original surface; even if you don’t like the color now, you or a new homeowner may want to remove the paint someday and return them to their original color. You can also cover them with 

Yes, Corian® and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.

For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.

After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.