Get matched with top pressure washers in Carlin, NV

Yes, you can use a pressure washer to help with deck paint removal. One of the benefits of pressure washing is its speed. However, a pressure washer is best used with a paint stripper. A paint stripper helps the paint lift from the wood, and then you can use the pressure washer to remove the paint effectively. To increase the longevity of the wood, you want to avoid using more than 1000 PSI on your pressure washer, as too much moisture will penetrate the wood and may cause mildew or rot.

It is possible to pressure wash your deck, but it’s usually best to leave the work to a professional for two main reasons. First, power washers are expensive, and you can avoid high upfront costs by hiring a deck washing pro instead. Second, you must be careful to use the correct setting to avoid damaging your deck material. You can only clean soft woods like pine with a wide spray and a low pressure; otherwise, the water will leave unpleasant marks on your deck. Hard woods, composite material, and metal can stand up to increasingly higher water pressures.

Always wear protective gear, including a mask, gloves, and eye goggles, whenever you’re dealing with high-pressure cleaning or cleaning with chemicals. But even if you’re just using plain water with your jet washer, don some gear to avoid splashing—especially from the hot water of a power washer—or any particles of dirt or debris that might fly off the surface as you clean it.

Do not use bleach when pressure washing, either in the machine or on the driveway itself. Bleach in a power washer will corrode the seal and nozzles of the machine. Spraying bleach (whether out of the machine or on the driveway itself) blasts bleach into the air. Bleach can be highly dangerous if inhaled, and it can kill plants, flowers, and neighbors' animals that accidentally ingest it.