Get matched with top welders in Sunland Park, NM

Q: How do you cut round ductwork?

• <div><p>Cutting round ductwork requires precision and the right tools. A duct cutter, specifically designed for circular ducts, is ideal. First, mark the cutting line on the duct using a measuring tape and pencil. Then, position the duct cutter's blade on the marked line. Apply steady pressure, rotating the cutter around the duct. The sharp blade creates a clean, precise cut. Alternatively, a reciprocating saw with a metal-cutting blade can be used for larger round ducts. Ensure the duct is securely held in place while making the cut to prevent slips and maintain accuracy.</p></div>

Q: How much do different welding projects cost?

• <div><p>Some welding projects, such as <a href="https://www.angi.com/articles/cost-to-repair-leaking-pipe.htm">repairing pipes</a> or fences, require travel, whereas others, like furniture repair, do not necessarily require the welder to come to you. Travel and overhead factor into the overall cost of your welding project. Some of the most common welding projects include:</p><ul><li><p>Metal furniture repair: $35&ndash;$100</p></li><li><p>Pipe repair: $200&ndash;$1,000</p></li><li><p>Small gates: $550&ndash;$750</p></li><li><p>Fencing: $1,200&ndash;$1,800</p></li><li><p>Fabricated sheet metal welding: $750&ndash;$2,500</p></li></ul><p></p></div>

Q: How do you cut rectangular ductwork?

• <div><p>Cutting rectangular ductwork requires careful measurements and the right technique. Use a measuring tape and pencil to mark the cutting lines accurately. Tin snips are excellent for straight cuts on smaller ducts. For more extensive or thicker rectangular ducts, a reciprocating saw with a metal-cutting blade is effective. </p><p>Ensure the duct is well-supported and secure while cutting to prevent wobbling and maintain precision. After cutting, use a metal file to smooth any sharp edges, ensuring safety during installation. </p></div>

Q: Can you cut plexiglass by hand?

• <div><p>Yes, you can cut plexiglass by hand using a sharp knife or blade (utility knife, box cutter, glass cutter, etc.). </p></div>

Q: Can you use a saw to cut metal pipe?

• <div><p>Yes, you can use a saw to cut metal pipes. The best saw to use is a reciprocating saw, but even a fine-tooth hacksaw can get the job done. No matter which saw you use to cut metal pipes, wear protective gear, like work gloves, safety goggles, and ear plugs. Apply a firm, steady pressure to the tool, and always ensure the pipes are secured so they don't move while you make the cuts.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Sunland Park, NM?

Select your specific project to find the pro for you.

Verified Reviews for Welding pros in Sunland Park, NM

*The Angi rating for Welding companies in Sunland Park, NM is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

*The HomeAdvisor rating for Welding companies in Sunland Park, NM is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

Last update on June 11, 2025

Reviewed in June 2025
This guy is are a professionals contractors. I recommend him. Good pricing and good job
DELROB Construction & Landscape
Request a quote
Reviewed in May 2025
Respectful,courtesy,and very attentive to work detail I would recommend these professionals to others looking for wrought iron fabrication applications.
Wicked Fabrications
Request a quote
Reviewed in March 2025
Had another excavation company back out last min. Hear guys stepped up and took the project on last min and charged LESS than the other guys. No delays saved me big time. 100% recommend.
Cat 5 Excavation and Demolition
Request a quote
Reviewed in December 2023
Hired Iron Man Exteriors to install and renovate the chain link on a 1 acre site. They quoted a fair price , arrived on time every day, did quality work and cleaned up everything . I would recommended them to anyone needing high quality work done.
Iron Man Exteriors
Request a quote
Reviewed in January 2023
Excellent work ! After several bad experiences with other contractors we were very impressed with the results Thank you Mr. Walter ! He was very professional, punctual, fast and clean . Great Work !!
JIA Remodeling Construction & Associates
Request a quote
Reviewed in September 2022
The gentleman was very professional and helpful , it was a pleasure to recommend to any homeowner s call Wagner plumbing or mechanical hands down thank you so much and informed me of what we needed to fix the ac great job if we do need other help we will call again! Wagner thank you for having...
Wagner Mechanical, Inc.
Request a quote
Reviewed in May 2022
I have used this company for water heater installation, plumbing repair under my slab and did some other minor plumbing repairs. TheyÃ¢Â Â ve done an excellent job, courtesy professionalism, reasonable prices and quick service normally the same day. The office staff extremely helpful and...
Mr. Rooter Plumbing of El Paso
Request a quote
Reviewed in April 2021
Just like the other reviewers have stated about their fence repair, I have an iron ornamental fence that had years of rust from a yard sprinkler system. The fence was falling apart in powdery orange dust in several places. Numerous sections or full lengths of metal had to be cut out and...
Lucky Mobile welding service
Request a quote
Reviewed in February 2019
These guys at Sun City Leak Detection are a criminally negligent fraud. They "discovered" two leaks in a water line between the city water supply at the street and our house and told us they could repair it. They were supposed to start the "repairs" two days later, but never showed up AND never...
FTO Plumbers
Request a quote
Reviewed in July 2015
The owner was very personable and polite. He replaced two faucets, but had to do additional work which required welding. He also made sure I had the right faucet off/on handles. I have arthritis in my hands, so I needed handles that didn't aggravate the pain. It was a pleasure doing...
Pro Plumbers Plumbing Co.
Request a quote

Find Welders in Sunland Park

Beacon Homes

5.0(

)

Serving Sunland Park, NM and surrounding areas

Approved

In business since 2001

Credit card accepted

Offers commercial services

"Very professional and affordable. Work was completed on time and clean up was superb. Highly recommend Beacon Homes!"

Response time2 days

24 neighbors recently requested a quote

Serving Sunland Park, NM and surrounding areas

Free estimates

Emergency services offered

Credit card accepted

"Service and craftsmanship was above and beyond! I ordered a custom grand entry French door for my house. What I got was a beautiful work of art that never fails to make an impression on new visitors. I spoke with Elijah, and he made sure the whole process was as smooth as possible. When he showed me the designs I could conceptualize the idea, but after the quick and easy installation was completed I was shocked at how it transformed my home. The best part about it it came with a free ten year warranty. After about a year, the hinges were a little squeaky, called them up to see if they could take a look at it. For no charge at all they came out worked on it and were in and out in a half hour. 10/10 would recommend."

Double Gates with automatic locking box and key entrance.

+20

Recommended by100%of homeowners

Serving Sunland Park, NM and surrounding areas

In business since 2023

Free estimates

Emergency services offered

"Did a great job in a timely and professional manner. Kept us informed on progress of work."

+29

Response time2 days

Response rate100%

Recommended by80%of homeowners

Request Quote

Jirons Transport & Mobile Welding Repair

5.0(

)

Serving Sunland Park, NM and surrounding areas

In business since 2020

Free estimates

Emergency services offered

"It was amazing. They had great communication. They were very professional and on time. They finished everything on time."

+34

Recommended by100%of homeowners

Request Quote

P & R Welding Services LLC

5.0(

)

Serving Sunland Park, NM and surrounding areas

In business since 2020

Credit card accepted

"Very professional crew, they had my 150ft by 80ft shop built in no time. Installed three jumbo remote garage doors for a very reasonable price. I will be using this company again for my upcoming projects."

Recommended by100%of homeowners

Request Quote

Hampton Enterprise LLC

3.7(

)

Serving Sunland Park, NM and surrounding areas

In business since 1989

Free estimates

Emergency services offered

"I only use James when I need some work done to my house. He responds fast, gets the work done quicker than just about anyone else I've ever used and seems very concerned with leaving his customers happy."

Recommended by60%of homeowners

Serving Sunland Park, NM and surrounding areas

In business since 2006

Emergency services offered

Credit card accepted

"They were very professional and polite they worked around my schedule I was assured I was in good hands with honest workers."

Recommended by100%of homeowners

Request Quote

Sunny Rivers handyman services

New to Angi

Serving Sunland Park, NM and surrounding areas

In business since 2005

Free estimates

Credit card accepted

All landscaping work. Automated sprinklers, water features, Pergulas. \nBilling: cash or credit.

Request Quote

Welding questions, answered by experts

Cutting round ductwork requires precision and the right tools. A duct cutter, specifically designed for circular ducts, is ideal. First, mark the cutting line on the duct using a measuring tape and pencil. Then, position the duct cutter's blade on the marked line. Apply steady pressure, rotating the cutter around the duct. The sharp blade creates a clean, precise cut. Alternatively, a reciprocating saw with a metal-cutting blade can be used for larger round ducts. Ensure the duct is securely held in place while making the cut to prevent slips and maintain accuracy.

Some welding projects, such as repairing pipes or fences, require travel, whereas others, like furniture repair, do not necessarily require the welder to come to you. Travel and overhead factor into the overall cost of your welding project. Some of the most common welding projects include:

Metal furniture repair: $35–$100
Pipe repair: $200–$1,000
Small gates: $550–$750
Fencing: $1,200–$1,800
Fabricated sheet metal welding: $750–$2,500

Cutting rectangular ductwork requires careful measurements and the right technique. Use a measuring tape and pencil to mark the cutting lines accurately. Tin snips are excellent for straight cuts on smaller ducts. For more extensive or thicker rectangular ducts, a reciprocating saw with a metal-cutting blade is effective.

Ensure the duct is well-supported and secure while cutting to prevent wobbling and maintain precision. After cutting, use a metal file to smooth any sharp edges, ensuring safety during installation.

Yes, you can cut plexiglass by hand using a sharp knife or blade (utility knife, box cutter, glass cutter, etc.).

Yes, you can use a saw to cut metal pipes. The best saw to use is a reciprocating saw, but even a fine-tooth hacksaw can get the job done. No matter which saw you use to cut metal pipes, wear protective gear, like work gloves, safety goggles, and ear plugs. Apply a firm, steady pressure to the tool, and always ensure the pipes are secured so they don't move while you make the cuts.

The Sunland Park, NM homeowners’ guide to welding services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
May 3, 2026May 3, 2026
How Much Does Awning Repair Cost? [2026 Data]
Discover the average awning repair cost, key price factors, and expert tips to help you budget and save on your next awning repair project.
Angi
•
May 30, 2026May 30, 2026
How Much Does a Wrought Iron Railing Cost? [2026 Data]
Discover how much a wrought iron railing costs. Get detailed price breakdowns, installation factors, and tips to save on your new railing project.
Scott Dylan Westerlund
•
May 30, 2026May 30, 2026
How Much Does Sheet Metal Fabrication Cost? [2026 Data]
Get transparent sheet metal fabrication cost info for your project. Learn what impacts price, compare options, and plan your project with confidence.
Samantha Hawrylack
•
May 22, 2026May 22, 2026
How to Glue PVC Pipes Together So They’re Watertight
PVC requires specific solvent cement to form a proper bond that won't leak or come apart with pressure. Learn how to glue PVC pipes with this guide.
Paige Bennett
•
May 2, 2026May 2, 2026
What’s the Difference Between Cast Iron and Steel Wood Stoves?
Looking for the best home heating option that doesn’t require electricity? Check out the pros and cons of cast iron versus steel wood stoves.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Steel Beam Installation Company
Find the right steel beam installation company for your project. Learn what questions to ask, qualifications to check, and how to ensure structural safety.