Get matched with top sonic cleaning pros in Pojoaque, NM

In most cases, it is best to leave icicles on your roof and allow them to melt naturally. You should only consider removing them if they are heavy enough to cause damage to your home or pose a risk to people below. Since removing icicles can be dangerous, it is recommended to hire a professional for the job if you have immediate concerns. To prevent the issue from recurring, you should address the underlying cause, such as improving your home's insulation or installing roof heating coils.

Complete house winterization goes above and beyond the list we created above. In addition to everything listed, full house winterization also includes:

• Performing a home energy audit.

• Preparing your deck and patio for winter.

• Learning how to start a snowblower.

• Replacing smoke detector batteries.

• Installing outlet gaskets.

• Installing storm doors.  

Tile roofs, including clay, concrete, and slate, are considered low-maintenance materials that require fewer repairs and less care than many other roofing options.

• Clay tiles require minimal maintenance. They stand up well to the elements and UV radiation, repel water, and do not easily stain, discolor, or fade in direct sunlight. Clay tiles do not need sealing. Maintenance is typically only required to replace cracked tiles, which can be caused by foot traffic, extreme weather, or fallen tree limbs.

• Concrete tiles are also low-maintenance but require more upkeep than clay. They need to be sealed every few years to maintain water resistance, and their color tends to fade more quickly than clay.

Aside from these material-specific needs, general maintenance for tile roofs includes annual inspections, routine gutter cleaning, and addressing repairs as they arise. A well-maintained tile roof can provide 50 to 100 years or more of protection for your home.

Yes, you can, but you’ll need to acquire the right pressure washer tips and cleaning solutions for the job. In particular, you’ll need tips that are capable of lowering the pressure from a max of 3,500 PSI to between 150 and 300 PSI. As for the cleaning solution, look for options that are clearly marked for soft washing rather than pressure washing.