"Not good. We had just replaced an element and they told us it was the wrong one and took the element but we had just put on and was going to bring back the proper one as well as the one that they had taken off they brought back a different one never brought back the new one that they had taken off but I had already replaced and two days later the furnace quit blowing hot air againI was told it would be more than a week before somebody could get out there and I had a newborn baby that was born less than a week earlier.. needless to say we ended up calling another company and the element was not the problem it's just that they were dirty posts on one of the firing pins it took a minute half with steel wool to clean it off and my furnace works works great ever since.
we won't be using them again for our heating needs "
Snakes can occasionally enter homes through shower drains, although it’s quite rare. This can happen when they follow sewer pipes or accidentally find their way into plumbing systems. To minimize the risk, consider installing drain covers or stoppers on your shower drains. Always keep drains closed when they’re not in use, especially in areas where snakes are known to be active.
As a preventative measure, hydro jetting should be done every one to two years. However, the best practice is to hydro jet your sewer line once per year. The ideal frequency depends on several factors, including the age and condition of your pipes, how prone they are to clogging, how often the sewer line is used, and the type of waste disposed of in the system. If you frequently experience clogs or are unsure, it's best to ask a licensed plumber for a recommendation specific to your plumbing system.
The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.
For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.
To get rid of a sewer smell in your crawl space, you’ll have to find the source of the problem. If it has to do with your sewer lines, then repairing the line will help. You may need to make other repairs, like fixing your sump pump or encapsulating your crawl space to reduce moisture. After you make the repair, depending on the issue, you may still need to clean out your crawl space to get rid of the stink.
No, you should not see water in a sewer cleanout. If you do, it could indicate that you have a block or leak in your main sewer line—which can cause sewage to back up inside your home and potentially flood your yard. Your best bet is to call a local sewer cleaner if you notice any water or sewage around your cleanout.
The Cotton City, NM homeowners’ guide to sewer cleaning services
From average costs to expert advice, get all the answers you need to get your job done.
A clogged main sewer line can lead to gas or wastewater leaks. Find out what main sewer line clog repair costs by type of service, clog severity, and more.
The best way to keep your sewer line running smoothly is with some regular maintenance. But don’t worry—it doesn’t take much effort. Read on to learn how.
