Top-rated welders.

Get matched with top welders in Demarest, NJ

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Demarest, NJ?

Select your specific project to find the pro for you.

Find Welders in Demarest

Avatar for Angel's Welding From Above, LLC
Angel's Welding From Above, LLC
3.8(
23
)
Steel Beams (Custom) - Fabricate

Serving Demarest, NJ and surrounding areas

Approved

In business since 2000

Free estimates

Offers commercial services

"I hired Angel to rebuild the roof structure of my 12x15 metal patio gazebo, which was crushed in the freak snowstorm Oct. 2018 (I did not take the fabric canopy down in time for winter storage). It was a pretty tricky job, because the roof supports had to be recreated/welded up at the exact same angles as the original in order for the new canopy to fit properly. Angel came and took measurements and pre-fabbed most of it in his shop. He came back with his two sons, and they reinstalled the whole thing in a few hours, including priming/painting the raw steel tubing. I was just going to just knock the old structure down and buy a new one, but that would have been a major PITA, not to mention big bucks. (Replacement parts are not available and need to be fabricated from scratch) Anyway, I now have the whole thing back together and even better than new because Angel used a heavier, thicker gauge of steel tubing. Highly recommend Angel and his crew - fair price and excellent workmanship!"
concrete plants
railing and fences
pipeing
concrete plants
railing and fences

+40

Recommended by88%of homeowners
AA Welding
New to Angi
Metal Structure or Object - Weld or Cut

Serving Demarest, NJ and surrounding areas

Approved

In business since 2010

Free estimates

Credit card accepted

AA Welding is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests and make their concerns the basis of our business. \n

Avatar for Plumbing And Welding Cooperation
Plumbing And Welding Cooperation
4.8(
6
)
Metal Stairs and Railings - RepairMetal Structure or Object - Weld or Cut

Serving Demarest, NJ and surrounding areas

In business since 2005

Free estimates

Emergency services offered

"Raoul (the welder) was very thorough. He definitely works to provide the welding and plumbing services I requested. I am a satisfied customer. Raoul is a very experienced welder with over 15 years of welding experience. I have used him in the past and will continue to hire him again. You will not be disappointed. I continue to recommend him to others!"
Welding Project
Welding Project
Rails
Install vanity and faucets
Welding Project

+23

Recommended by100%of homeowners
...
Showing 1-10 of 126
Welding questions, answered by experts

The cost to weld aluminum averages about $14 to $22 per pound. The type of metal factors into the overall cost of any welding project due to the cost of the materials and the expertise required to work with it. Some of the most common metals used by welders include:

  • Magnesium alloy: $7–$16 per pound

  • Low-carbon steel: $11–$12 per pound

  • Stainless steel: $13–$15 per pound

  • Copper/brass: $24–$29 per pound

  • Cast iron: $38–$79 per pound

  • Titanium: $60–$85 per pound

Cutting rectangular ductwork requires careful measurements and the right technique. Use a measuring tape and pencil to mark the cutting lines accurately. Tin snips are excellent for straight cuts on smaller ducts. For more extensive or thicker rectangular ducts, a reciprocating saw with a metal-cutting blade is effective. 

Ensure the duct is well-supported and secure while cutting to prevent wobbling and maintain precision. After cutting, use a metal file to smooth any sharp edges, ensuring safety during installation. 

Yes, you can cut plexiglass by hand using a sharp knife or blade (utility knife, box cutter, glass cutter, etc.).

Yes, you can use a saw to cut metal pipes. The best saw to use is a reciprocating saw, but even a fine-tooth hacksaw can get the job done. No matter which saw you use to cut metal pipes, wear protective gear, like work gloves, safety goggles, and ear plugs. Apply a firm, steady pressure to the tool, and always ensure the pipes are secured so they don't move while you make the cuts.

This all depends on the tools you have on hand and whether you’re trying to cut a straight line or shapes. 

The best tool to use for straight lines is either a circular saw or table saw. When cutting shapes, a jigsaw will be the easiest and most precise tool to use. 

The Demarest, NJ homeowners’ guide to welding services

From average costs to expert advice, get all the answers you need to get your job done.