Top-rated welders.

Best welders near Englewood, NJ

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Englewood, NJ?

Select your specific project to find the pro for you.

Top-Rated Welders in Englewood - Updated Nov 2026

Avatar for Angel's Welding From Above, LLC
Angel's Welding From Above, LLC
3.8(
23
)
Steel Beams (Custom) - Fabricate

Serving Englewood, NJ and surrounding areas

Approved

In business since 2000

Free estimates

Offers commercial services

"I hired Angel to rebuild the roof structure of my 12x15 metal patio gazebo, which was crushed in the freak snowstorm Oct. 2018 (I did not take the fabric canopy down in time for winter storage). It was a pretty tricky job, because the roof supports had to be recreated/welded up at the exact same angles as the original in order for the new canopy to fit properly. Angel came and took measurements and pre-fabbed most of it in his shop. He came back with his two sons, and they reinstalled the whole thing in a few hours, including priming/painting the raw steel tubing. I was just going to just knock the old structure down and buy a new one, but that would have been a major PITA, not to mention big bucks. (Replacement parts are not available and need to be fabricated from scratch) Anyway, I now have the whole thing back together and even better than new because Angel used a heavier, thicker gauge of steel tubing. Highly recommend Angel and his crew - fair price and excellent workmanship!"
concrete plants
railing and fences
pipeing
concrete plants
railing and fences

+40

1 neighbors recently requested a quote
Recommended by88%of homeowners
Avatar for Better Standards
Better Standards
4.7(
16
)
Metal Structure or Object - Weld or CutMetal Stairs and Railings - Repair

Serving Englewood, NJ and surrounding areas

Approved

Super Service Award Winner

In business since 2018

Free estimates

Small jobs welcome

"Tom is great. Not only is he available when needed, he comes up with great and practical ideas to ensure my facility is safe and running properly. He is responsive and ready for a challenge. I highly recommend his services. He’s well rounded with anything and everything you may need for repairs, building, welding, and even plumbing. He’s a trade master. I’m so thankful to have found him and will be using him for all future repairs needed at my facility."
Response time2 days
Response rate88%
11 neighbors recently requested a quote
V W Home Improvement, Inc.
4.2(
65
)
Steel Beams (Structural) - Install

Serving Englewood, NJ and surrounding areas

Approved

In business since 1979

Free estimates

Customers say: Quick response

"I could not imagine a more qualified, diligent builder is out there . VW was there every step of the way and went above and beyond on all phases of the construction. Every single detail was thought of and performed. The work was all done timely and is top quality. I cannot say enough good things about VW"
 DESIGN BUILD
 DECK RESTORATION
 VW CONSTRUCTION PROJECTS
 VW HOME IMPROVEMENT
 BATHROOMS/TILE

+37

Response time5 hrs
Recommended by96%of homeowners
AA Welding
New to Angi
Metal Structure or Object - Weld or Cut

Serving Englewood, NJ and surrounding areas

Approved

In business since 2010

Free estimates

Credit card accepted

AA Welding is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests and make their concerns the basis of our business. \n

...
Showing 1-10 of 143
Welding FAQs, answered by experts

Yes, you can cut plexiglass by hand using a sharp knife or blade (utility knife, box cutter, glass cutter, etc.).

Professional metal fabricators typically charge around $70 per hour, but the total cost of your project will depend on several factors. The largest cost drivers are the size, complexity, and design of the project, as well as the price and type of metal used. A good way to estimate the total cost is to multiply the cost of raw materials by four; typically, one-quarter of the total goes toward materials and three-quarters toward labor. Your geographic location can also influence costs, as labor and material prices vary by region.

Yes, but you’ll need reliable steel-cutting tools and safety gear to get started. Shipping containers are typically around ¾ inch thick, so it’s entirely possible to cut through them, but experience and the right equipment are very important. When possible, try to get a container as close to the size you want it as possible.

The average cost for a welding project is about $300, with typical costs ranging from $125 to $490. However, prices can be as low as $125 for very small jobs or exceed $1,200 for large or complex projects. Welders typically charge an hourly rate between $65 and $150, depending on their experience, and many charge a minimum fee to cover overhead and travel expenses. The total cost is influenced by several factors, including labor, the cost of materials like metal rods and shielding gas, the type of metal being welded, the project's size and complexity, and your geographic location. For a precise quote, it's best to ask a local welder for an estimate based on your specific project.

Costs depend on unit complexity, labor, wall mounting needs, and additional accessories like floating shelves.

The Englewood, NJ homeowners’ guide to welding services

From average costs to expert advice, get all the answers you need to get your job done.