Get matched with top fencing pros in Plaistow, NH

Yes, you can use a floor jack to remove fence posts. Attach a stem to the base of the fence post so you can position the floor jack underneath. The stem can be a scrap piece of wood attached with nails or a sturdy nail itself. Put the jack beneath the stem and push the lever to lift up on the fence post and remove it from the ground.

Whether you need a permit to build or install a fence depends on several factors, including your location, the fence's height, its placement in your yard, and the materials used. In many cities and highly populated areas, a permit is required, especially for fences taller than 6 feet. Conversely, rural areas may have fewer restrictions. Typically, backyard privacy fences 6 feet or shorter do not require a permit, while front yard fences often have a lower height limit, sometimes as low as 3.5 feet. There can also be exceptions for properties in mixed residential-commercial zones. It's best to check with your local building inspection or zoning department to understand the specific requirements, height restrictions, and location rules for your area. A professional fence installer can help you navigate this process and often secure the necessary permits for you, though this may extend the project timeline.

When it comes to materials, wire fences are the cheapest option. The average cost for a 150-foot wire fence is $1,350. The next cheapest material is chain-link, followed by wood.

As far as the style of fence, smaller, less private fences are cheaper than large, elaborate fences that block your whole yard. That’s why split-rail fences are the cheapest option for wooden fences. They cost roughly $10 to $30 per linear foot.

The average cost to install a wrought iron fence is around $3,150, with typical project costs ranging from $470 to $10,500. The final price can vary significantly based on several factors, including the fence's total length and height, design complexity, metal thickness, and your property's topography.

For materials alone, you can expect to pay around $25 to $35 per linear foot. When including installation, the cost is typically between $50 and $70 per linear foot.

Additional factors that can influence the total cost include:

• Custom designs, decorative flourishes, gates, and columns

• Labor costs in your area

• The need for permits

• Land preparation, such as old fence removal, tree or bush clearing, and land grading

For an accurate estimate, it is best to consult a professional fence installer with the specific measurements and design requirements for your project.