Get matched with top land surveyors in Newbury, NH

Soil testers and licensed excavators are often the professionals you hire if you need a perc test. In some cases, structural engineers will also be able to conduct the test for you. In many municipalities, you’ll need your professional on-site to dig and fill the holes with water, as well as a representative from your local building department or health department. That representative is the individual who will determine whether your test passes or fails.

Land surveying costs about $530 for the average homeowner. However, your total cost could range anywhere from $200 to $1,000 or more. Factors like the size of your property play a significant role in what you pay, but other things like the survey type and the time of year can also impact the final cost. 

For example, if you’re looking for a simple boundary survey, you can expect to pay between $100 and $600. However, if you want a more in-depth survey that depicts the elevations of your hills and trees, you can expect to pay between $500 and $1,200 for a topographic survey.

Building a road on a slope requires careful planning and will normally require a drainage system underneath to prevent flooding and damage to the road over time. Your professional may lengthen your road to create switchbacks if the slope directly to your home is too steep, as there are regulations for maximum road slope. The drainage system will help prevent runoff from the higher side of the slope from damaging the asphalt or concrete. Keep in mind that building a road on a slope isn’t a good DIY project, as a lot can go wrong.

There are a couple of ways you can determine the depth of your well. One method is to use a device called a well sounder. This tool has a long measuring tape containing a sensor to alert you once the end reaches the water. 

Or you can DIY it by using a long tape measure with a half-filled bottle of water attached to it. Lower the tape measure into your well. Once you feel tension on the tape, you’ll know the bottle has reached your static water level. This will give you an approximate idea of your well’s depth.