Get matched with top pressure washers in Ord, NE

On average, pressure washing a house can take anywhere from 30 minutes to three hours. The time frame to pressure wash or power wash your home, fence, or other property depends on the size of the project and the complexity and accessibility of the areas that need cleaning. Part of the time required to complete the job includes setup and removal of equipment needed. A two-story house with a steep roof may require working from scaffolding or a ladder, likely adding to the time required to finish the project. 

The amount of pressure, measured in psi, that you should use depends on what you’re washing. Very tough materials like concrete, stone, and masonry can handle a high psi of 2,500 to 3,000, but materials like wood require a bit of a lighter touch. To clean your wooden deck, you’ll want to use your pressure washer on the lowest setting, around 600 psi, especially if it’s made of soft wood like pine or cedar.

Yes, you can pressure wash epoxy garage floors. Most epoxy floors can be cleaned with a mop, but you may choose to pressure wash your floor if it is stained, has ground-in dirt, or is covered with mold or mildew. Before pressure washing, soak stains and dirty areas with a gentle cleanser for best results. Then use a pressure washer tip angled at 45 degrees and raise the spray nozzle to at least 18 inches off the floor to protect the flooring surface. You can also use a surface cleaner power washer or rotary scrubber to prevent overspray. 

No matter the material, the best times to pressure wash or power wash a patio are spring and summer during a string of dry days. As long as the temperature is above 40 degrees Fahrenheit, you won’t encounter any cold-related issues. You need those dry days to ensure no algae or mold grows on the wet surface of the patio.