Get matched with top sandblasting pros in Macy, NE

Q: How do I maintain flatwork surfaces?

• <div><p>Seal joints, clean debris regularly, and address cracks promptly to maintain appearance and stability.</p></div>

Q: What is the best way to sand a deck?

• <div><p>The best way to sand a deck is by cleaning it, sanding the boards and stairs with 60- or 80-grit sandpaper, and sanding the railings and posts with 80-grit sandpaper. You should sand in the direction of the wood grain to avoid damaging the timber. When sanding your deck, use medium pressure and aim for an even sand. Pressing too hard with a sander can damage decks, as most are softwoods. </p></div>

Q: Which costs more: soda blasting or sandblasting?

• <div><p>Soda-blasting systems are slightly more expensive than sandblasting systems. To soda blast, you&rsquo;ll need to spend a few hundred dollars for a blast hose and nozzle, a compressed air supply, a blast generator, a moisture decontamination system, and sodium bicarbonate media, a recurring cost because the powder is not reusable. To start with sandblasting, you will need to spend upwards of $30 for a blast pot, a blast gun, an air compressor, and sandblasting media, many of which are recyclable&mdash;further reducing the cost. The total cost for either will depend on the size of the system.</p></div>

Q: Is it better to sand or pressure wash a deck?

• <div><p>Sanding and pressure washing are both effective ways of maintaining your deck, but one method isn&rsquo;t necessarily better than the other. Instead, they have different purposes and benefits. Pressure washing cleans dirt and grime off a deck and should be done every year. Sanding removes the old finish and prepares a deck for staining or sealing. This should be done every one to two years. </p></div>

Q: Is sandblasting dangerous?

• <div><p>There are two ways sandblasting could be dangerous: improper use of the equipment so that the stream touches your skin, and air particles created during the sandblasting process. While the first is easier to avoid and fairly obvious, the second has the potential to be more serious and is much more difficult to understand. This is why you should always hire a pro to sandblast, as they understand the dangers associated with the process. If proper safety measures are taken, then sandblasting is rarely dangerous. </p></div>

Enter your ZIP and get matched with up to 5 pros

Need a pro for your sandblasting service project in Macy, NE?

Select your specific project to find the pro for you.

Get matched with top sandblasting pros in Macy, NE

Enter your ZIP and get matched with up to 5 pros

Need a pro for your sandblasting service project in Macy, NE?

Handyman for Multiple Small Project Service

Interior Painting or Staining Service

Small Projects Painting or Staining

Find Sandblasting pros in Macy

KMC Services, LLC

KMC Services, LLC

Preferred Painting

Preferred Painting

Works By Weiss

Works By Weiss

Black Top Contractors LLC

Black Top Contractors LLC

US Soft Wash and Construction

US Soft Wash and Construction

Wilson Painting Company

Wilson Painting Company

Murphy's Law Construction

Murphy's Law Construction

Chimerical Solutions Inc.

Chimerical Solutions Inc.

sandoval & sons costruction

sandoval & sons costruction

Todd's Painting

Todd's Painting

The Macy, NE homeowners’ guide to sandblasting services

How Much Does Powder Coating Cost? [2025 Data]

How Much Does It Cost to Rent a Sandblaster? [2025 Data]

How Much Does It Cost to Paint the Exterior of a House? [2025 Data]

What’s the Difference Between Interior and Exterior Paint?

What Sheen Is Best for Exterior Painting?

How to Spray Paint Your House Exterior in 10 Steps

Find Sandblasting service Pros in other cities near youNot finding what you are looking for in Macy? Check surrounding areas for Sandblasting pros.

Which Sandblasting service task are you tackling?Find Macy Sandblasting services on Angi who specialize in any of these tasks