Get matched with top countertop and backsplash pros in Juniata, NE

Before making any big plans, climb up a step ladder and closely examine the top of your cabinets. You’ll get to see what sort of clean-up work needs to be done, but you can also check for any unexpected obstacles. Sometimes this space holds electrical boxes, wiring, or even plumbing components. Those will affect plans to install a new layer of cabinets or shelves.

Yes, you can change the color of concrete countertops multiple times. If you use paint rather than a stain, you can go from dark to light, but if you are only using a stain, you can go from light to dark.

Yes, epoxy countertops can yellow over time, especially when they are exposed to direct sunlight or UV rays for an extended period. Discoloration is also often a part of the natural aging process of epoxy resin. UV-resistant epoxy products and a protective topcoat can help minimize yellowing and maintain the countertop's original appearance for extended periods.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.