Best drain cleaners near Culbertson, NE

While you don’t have to run out and immediately buy a new toilet at the first sign of a clog, if the toilet keeps clogging because it’s a low-flow or poorly designed model, a new toilet may be the way to go. If your toilet keeps clogging, you can try using less toilet paper, adjusting the fill valve, checking the toilet vent pipe on the roof, and using a toilet auger to make sure nothing is stuck in the pipe or trap.

Plumbers use a variety of tools to help unclog the toughest of drain clogs, but the most common tools they use are drain snakes and augers. They try a plunger or drain snake to start, then move to heavy-duty augers, and finally try using a hydro jetter to blast away the clog with high-pressure water. Hiring a plumber to unclog a drain costs $125 to $300, largely depending on the extent and location of the clog and which of these methods is best for clearing it.

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

It is generally not recommended to pour hot or boiling water down a drain to unfreeze pipes due to significant risks. In some cases, the sudden temperature change can cause more ice buildup or produce steam, which increases pressure and could cause the pipe to burst, leading to costly damage and potential burn injuries. While hot water might help with a partially frozen drainpipe, it is unlikely to thaw a completely blocked water pipe further down the system. Additionally, boiling water can damage plastic pipes over time. Safer and more effective methods include using a space heater near the frozen section or applying hot towels directly to the pipe.