Q: Will pressure washing damage my shower or tub?

• <div><p>Even at the lowest setting, there&rsquo;s always a risk that pressure washing might damage your shower or tub. Never use this technique if there&rsquo;s pre-existing damage in your shower or tub, like peeling caulk, sealant, or cracked tiles. And skip this method entirely if there are any wood features present.</p></div>

Q: Will a chipped bath leak?

• <div><p>A chipped bathtub could leak over time if you don&rsquo;t take care of the issue. A tiny chip isn&rsquo;t a big deal but may eventually grow into a larger crack. As the months go by, the tub&rsquo;s barrier against moisture becomes weakened, making it prone to leaking. Large chips can also cause the tub to rust and even crack in half.</p></div>

Question 1

How long does it take the tub resurfacing smell to go away?

Accepted Answer

•

It takes about 24 hours for the tub resurfacing smell to go away or the total dry time, although you will notice it the most during the first couple of hours. Refer to the manufacturer’s instructions or ask your bathtub resurfacing pro how long it takes for the smell to dissipate.

Question 2

What causes holes in a bathtub?

Accepted Answer

•

While tubs are fairly sturdy, you may notice cracks or holes. This kind of damage can happen from someone accidentally dropping something heavy into the tub. You might also see damage if you drop something heavy into the tub over and over again (like your extra large bottle of body wash). While you might only notice a small dent at first, this can later turn into a crack or a hole.

Also, certain cleaners that are harmful to your tub can cause damage. And if you have a fiberglass tub, you might see cracks if it was not installed properly with the right support.

Question 3

Are there alternatives to caulking my bathtub?

Accepted Answer

•

You can use other ways to seal the space where your tub and the bathroom tile meet. Using sealant tape, epoxy sealer, and spray foam can be just as effective as caulking your bathtub. When using alternatives to caulk, the one that is best for you depends on your preferences.

Sealant tape takes less time and effort to use, which is why some homeowners prefer it. Meanwhile, epoxy sealer creates a smooth and glossy finish that can complement your bathroom. Lastly, spray foam is waterproof and can act as insulation for your tub.

Question 4

Will pressure washing damage my shower or tub?

Accepted Answer

•

Even at the lowest setting, there’s always a risk that pressure washing might damage your shower or tub. Never use this technique if there’s pre-existing damage in your shower or tub, like peeling caulk, sealant, or cracked tiles. And skip this method entirely if there are any wood features present.

Question 5

Will a chipped bath leak?

Accepted Answer

•

A chipped bathtub could leak over time if you don’t take care of the issue. A tiny chip isn’t a big deal but may eventually grow into a larger crack. As the months go by, the tub’s barrier against moisture becomes weakened, making it prone to leaking. Large chips can also cause the tub to rust and even crack in half.