Get matched with top bathtub restoration pros in Underwood, ND

If your bathtub is in overall good shape with minor scratches, discoloration, or just general wear and tear, it's best (and less expensive) to refinish it. 

If your tub has large cracks, is leaking, or is otherwise severely damaged, we recommend replacing it with a new bathtub. Refinishing a bathtub can only fix superficial problems, so these issues will still be present or reappear after a refinishing.

Bathtub refinishing costs an average of $460 and includes removing the finish, sanding or acid etching the surface, priming it, and applying an epoxy coating. After the coating cures, the bathtub should look as good as new, and the finish should last between seven and 10 years. Because bathtub refinishing requires hazardous chemicals, you should call a bathtub refinisher to do the job.

Acrylic tubs can fade or turn yellow over time due to thick layers of accumulated dirt, hard water deposits from minerals, and shampoo or soap dyes. Also, as an acrylic tub ages, it may become dull or change color due to changes in the acrylic itself.

Before you begin caulking a shower, you’ll need to use a utility knife or solvent to remove the old caulk and inspect the area for mold. If needed, take appropriate steps to get rid of the mold, then wipe everything down with dish soap and warm water before letting it dry completely. Finally, surround the caulking area with two strips of blue painter’s tape—one above the joint where you’re caulking and another below it.