Get matched with top bathtub restoration pros in Rolla, ND

Of the two most common and affordable bathtub materials, acrylic is notably better. Though fiberglass is cheaper, it is also more prone to scratching, chipping, fading, and cracking. Acrylic holds up better to wear and tear, cleaning, and sun exposure; the slight cost increase is usually worth the increased longevity.

Even at the lowest setting, there’s always a risk that pressure washing might damage your shower or tub. Never use this technique if there’s pre-existing damage in your shower or tub, like peeling caulk, sealant, or cracked tiles. And skip this method entirely if there are any wood features present.

A chipped bathtub could leak over time if you don’t take care of the issue. A tiny chip isn’t a big deal but may eventually grow into a larger crack. As the months go by, the tub’s barrier against moisture becomes weakened, making it prone to leaking. Large chips can also cause the tub to rust and even crack in half.

There are a few ways to check whether your tub is fiberglass or acrylic. If your tub is a color other than white, then your tub is likely acrylic (as fiberglass tubs are usually white). Check to see if there is discoloration on the bottom of the tub, because if it’s yellowed, then you can be fairly sure it’s fiberglass.

Also, fiberglass tubs have thinner edges and are cool to the touch. Acrylic, on the other hand, is either room temperature or warm to the touch.