Get matched with top fence painters in Northwood, ND

Yes, you can paint a chain-link fence, but you don’t want to use spray paint. With the spray method, you’ll be losing a majority of your product to the air, given the size of the gaps in chain-link fences. Instead, use a paintbrush for your fence posts and a paint roller for the wire.

Stain is meant to be absorbed by the porous wood, allowing some of the natural grain to show through. With that in mind, you don’t want to add more stain than the wood can absorb, as you risk covering up its natural markings. Generally, two coats is the maximum you should do, although very dense hardwoods may only be able to take a single coat.

Pressure-treated wood can not only be painted and stained, but it should be; doing so will help to prevent surface or deck board cracking. Allow the wood to dry out before painting it, as pressure-treated wood from the hardware store takes longer to dry than kiln-dried lumber. If water beads on the surface, it needs additional time to dry—in fact, it can take weeks or even months to fully dry. As soon as the wood absorbs water on the surface, it is ready to be painted or stained.

If possible, it is beneficial to paint both sides of your fence to protect the fence more completely from the elements. Painting both sides of your fence will create a more consistent appearance as well. However, the time and cost involved in painting both sides of the fence may cause people to paint only the side they see.