Get matched with top grout and tile cleaning pros in Larimore, ND

Solvents dissolve tile adhesive, but the right solvent for the job depends on what type of adhesive you are trying to remove. For instance, dispersion adhesive requires stronger removers, like bile soap or even paint stripper, but some adhesives, like cement-based products, can come off with water and soap or mortar remover.

While the above methods will help you remove paint from tiles, you may need to take a different approach to get rid of grout haze. If you’ve recently applied the grout, you may be able to wipe it off with a wet cloth. Otherwise, you can try removing it with a rubber grout float, spraying it with a mixture of four parts water to one part vinegar, or using a store-bought grout haze remover.

The best method for keeping your grout clean depends on the level of staining or discoloration. For light cleaning, use warm water and a stiff brush (specifically made for cleaning grout). 

Tougher jobs call for a one-to-one solution of white vinegar and water in a spray bottle. Spray the area down, wait 5 to 10 minutes, then scrub with your brush. For even more cleaning power, add water to baking soda until it creates a paste and apply it before the vinegar. If the mess is too much, you can call a local tile and grout cleaner.

The best cleaner to remove soot depends on the surface material and the type of fire, but consider dish soaps or degreasers, baking soda, rubbing alcohol, and hydrogen. Low-oxygen fires often leave behind greasy soot, which is best removed with dish soaps or degreasers. Baking soda can be useful for absorbing soot deposits from carpets, followed by rubbing alcohol or hydrogen peroxide to clean the set-in stains.