Get matched with top cabinet makers in Kenmare, ND

There are three primary ways to attach upper kitchen cabinets to a wall, and installers may use more than one method at a time. The most common method is to drive screws through the back of the cabinets and into studs in the wall behind. Sometimes cabinets are glued to the wall with strong adhesive. Often a combination of screws and adhesive is desirable. The last way is by hanging the cabinets on hardware brackets that attach to the wall before cabinet installation.

There should be at least 18 inches of space between the upper wall cabinets and your countertop in order to have enough room to use your countertops. If you have a kitchen island, you should allow 42 to 48 inches between the base cabinets and the island for door clearance and walking space.

Yes. It’s common to have a combination of knobs and pulls for drawers and cabinets. There are usually a few different-sized cabinet doors or drawer fronts that look better with different scales of handles, or you might prefer one type of handle for a drawer front and a different one for a cabinet door. Be sure to choose handles of the same overall type when you mix and match and avoid using more than three types in one room to make sure everything flows together.

Standard 2x4 boards and plywood or particle boards are sturdy and cost-effective for making garage shelves, and pressure-treated 2x4s are best for any portion that will contact an unfinished concrete slab in the garage. You can create custom shelving with these materials or use standard sizes for fewer cuts. Plywood and 2x4s are easy to work with and cut with a standard miter saw. The natural wood offers a modern look and will hold up for decades.