Get matched with top gas leak repair technicians in Cavalier, ND

In most cases, yes, it’s safe to light a gas water heater manually, but you should shut the gas off first, open a window, and let the space air out for about 10 minutes. Modern water heaters shut the gas off entirely if the pilot light goes out, but airing out the area beforehand is good practice and will ensure it’s safe to relight your pilot light manually. Just make sure you turn the gas valve to “pilot” before lighting. If the light keeps going out or won’t light at all, call in a professional.

Yes. There are a variety of standard pipe sizes used in plumbing. The main supply line connecting your home to the street is either 3/4 or 1 inch in diameter. Supply lines are 3/4 inch in diameter. Individual components are 1/2 inch in diameter. Meanwhile, your main drainpipe is often 4 inches wide. Most shower and bathtub drains are 2 inches in diameter, most toilet drains are 3 inches in diameter, and most sink drainpipes are 1 1/4 or 1 ½ inches in diameter.

Most qualified local plumbers in your area should be able to help with this job. However, it's always best to check with your utility company before starting any gas-related project. Speak with them about your needs and request recommendations for licensed plumbers who can pull permits and properly install the line.

Fixing a gas leak costs about $45 to $150 per hour for a plumber or gas line specialist. The job’s overall cost will vary depending on the location of the leak. A leaky junction or connection behind the stove or dryer will likely cost about $120 to $170. But for a leak that requires a gas fitter or plumber to excavate a pipe in the yard, the cost could rise to $1,500 to $5,000. Keep in mind that gas leaks are very serious issues, so don’t hesitate to contact a plumber or gas line specialist immediately.