Get matched with top bathtub restoration pros in Bowman, ND

There are a few ways to check whether your tub is fiberglass or acrylic. If your tub is a color other than white, then your tub is likely acrylic (as fiberglass tubs are usually white). Check to see if there is discoloration on the bottom of the tub, because if it’s yellowed, then you can be fairly sure it’s fiberglass.

Also, fiberglass tubs have thinner edges and are cool to the touch. Acrylic, on the other hand, is either room temperature or warm to the touch.

Yes, you can absolutely remove rust from a bathtub drain, and doing so can improve the appearance of your tub. Combine three parts baking soda with one part vinegar and mix into a paste. Apply the paste over the drain and let it sit for about an hour before rinsing with cold water. Repeat the process if some rust stains remain. If the stains return, consider installing a water softener, as ongoing issues with bathtub drain rust usually indicate hard water.

Bathtub refinishing costs an average of $460 and includes removing the finish, sanding or acid etching the surface, priming it, and applying an epoxy coating. After the coating cures, the bathtub should look as good as new, and the finish should last between seven and 10 years. Because bathtub refinishing requires hazardous chemicals, you should call a bathtub refinisher to do the job.

Refinished bathtubs typically need to be refinished every five years or so. Frequent cleaning and use will break down the finish and make cracks and chips appear more readily. Cracks and chips tend to grow once they begin unless they are repaired immediately. Ideally, you should refinish your bathtub before it gets old enough that refinishing isn’t worth the hassle.