Get matched with top woodworkers in Maxton, NC

Q: What tools and blades are recommended for cutting Corian?

• <div><p>Yes, Corian&reg; and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.</p><p>The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.</p><p>It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.</p><p>Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.</p></div>

Q: Do carpenters fix squeaky floors?

• <div><p>Yes, carpenters can fix squeaky floors. They have the expertise to identify the source of the squeak, whether it&rsquo;s loose floorboards, subfloor issues, or joist problems. These experts also have the right tools and hands-on knowledge to secure the flooring and eliminate the noise, ensuring a long-lasting solution. </p></div>

Q: Are beams and joists the same?

• <div><p>No, beams are the primary load-bearers for flooring or roofing systems, and they distribute the weight of the structure to your foundational supports, while joists bear far less weight and distribute their loads to the beams. Beams are usually thicker and longer, and they have support posts or foundation walls beneath them for support.</p></div>

Q: What do most carpenters charge per hour?

• <div><p>On average, the cost to hire a carpenter ranges from about <b>$75 to $100 per hour</b>, depending on the type of carpentry, location, size of the job, and skill level of the carpenter. Get quotes from at least three carpenters in your area to determine the best price for your specific project.</p></div>

Q: What is the difference between a spindle and a baluster?

• <div><p>Many people, including professionals in the field, use baluster and spindle interchangeably to describe the vertical components of a railing (or technically, a balustrade). However, there are subtle or distinct differences, depending on who you ask. The most common interpretation is that spindles are thin or delicate versions of balusters. </p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your woodworking project in Maxton, NC?

Select your specific project to find the pro for you.

Verified Reviews for Woodworking pros in Maxton, NC

*The Angi rating for Woodworking companies in Maxton, NC is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

*The HomeAdvisor rating for Woodworking companies in Maxton, NC is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

Last update on July 16, 2025

Reviewed in July 2025
Mr Chavis and his crew did a wonderful job building a porch with roof. Very efficient and dependable. And his price was fair also. I have another project coming up and I’m using him for that also. Thank you Mr Chavis for a job well done
Chavis Drywall
Request a quote
Reviewed in October 2024
This contractor is hands down the best I’ve ever had work for me. Very professional and reasonably priced. I highly recommend this company for any roofing or landscape projects. I will definitely hire again for these services.
Garnie McNeill Roofing & Lawncare
Request a quote
Reviewed in August 2024
Very impressed. To fit me into their schedule, the team of tile and stone guys worked through several nights to complete my project in a timely manner. They seemed very skilled and knowledgeable in their craft. Nice job 👏. It's beautiful. Thank you!
Final Touch Signature LLC
Request a quote
Reviewed in May 2024
The project turned out great, exactly as we wanted. Wrights Fencing pros worked with us on schedule, kept in contact to completion and finished on time. The vinyl fence looks beautiful! We will use their services again very soon.
Wright's Fencing
Request a quote
Reviewed in March 2024
Great job and also dis framing on the base of my chimney..
Country Boyz Construction
Request a quote
Reviewed in March 2024
Very professional and dependable company. Quality of work and craftsmanship is excellent. I recommend these guys for any job.
Reliable Reinforcements, LLC
Request a quote
Reviewed in March 2024
Excellent work good work ethic
Hunt's EarthlyDigging LLC
Request a quote
Reviewed in February 2024
They were great! Did a wonderful job on the floors, counters. The work crews were fast neat and the price was reasonable. Would absolutely recommend.
Budget molding & more llc
Request a quote
Reviewed in August 2023
An excellent job cleaning house and buildings
Top Notch Soft Wash
Request a quote
Reviewed in April 2023
Brad and his staff -were extremely professional. Nice job on our driveway and walkway. I would recommend Cummings Construction to anyone. You definitely get your moneys worth. No disappointments.
Cummings Construction
Request a quote

Find Woodworkers in Maxton

TravLock Furniture

5.0(

)

Closet - BuildCustom Cabinets - BuildFurniture - Build Custom

Serving Maxton, NC and surrounding areas

Approved

In business since 2019

Free estimates

Small jobs welcome

"Custom cabinets were built as requested, and were excellent quality. TravLock Furniture manufactured and installed Cabinets on schedule and without any issues. After installation I hired TravLock for additional cabinet work which was completed in a timely manner. I would recommend TravLock furniture to anyone seeking cabinet work."

+19

Response time11 hrs

Response rate100%

Recommended by66%of homeowners

Request Quote

M&D Property Solutions

4.5(

)

Closet - BuildCustom Cabinets - BuildGazebo or Freestanding Porch - Repair+2 more

Serving Maxton, NC and surrounding areas

Approved

In business since 2017

Emergency services offered

Warranties offered

"Needed fencing installed to keep groundhogs from taking up residence under our deck. Brady came up with a creative and complete solution that made sure the varmints were out and would not return. Would use again."

+10

Response time1 day

1 neighbors recently requested a quote

Recommended by100%of homeowners

Request Quote

Wherren Builders, Inc.

5.0(

)

Closet - BuildCustom Cabinets - BuildInterior Trim and Decorative Moldings - Install

Serving Maxton, NC and surrounding areas

Approved

In business since 2002

Free estimates

Emergency services offered

"Remarkable craftsmanship!! They were fantastic"

+35

5 neighbors recently requested a quote

Recommended by100%of homeowners

Serving Maxton, NC and surrounding areas

Approved

Super Service Award Winner

In business since 2007

Free estimates

Warranties offered

"Project was to design and install a closet system for a large reach in closet. Estimator arrived on time, helped to design the closet and provided all the needed information. Installer was excellent and the closet looks beautiful. We are very pleased with all the services. David"

Contemporary Entry - Seat Beach Floral Pattern Cushion

+62

543 neighbors recently requested a quote

Recommended by90%of homeowners

Request Quote

TOP FINISH COATINGS PAINTING AND HOME IMPROVEMENT

5.0(

)

Interior Trim and Decorative Moldings - InstallInterior Trim and Decorative Moldings - Repair

Serving Maxton, NC and surrounding areas

Approved

Super Service Award Winner

In business since 2023

Free estimates

Offers commercial services

"Israel is a very professional person and performs quality work very detaled 100% satisfied with his work and will 100% recomend"

Response time2 days

Carpentry Framing - InstallCarpentry Framing - Repair

Serving Maxton, NC and surrounding areas

Approved

Super Service Award Winner

In business since 1996

Free estimates

Emergency services offered

"Work was done very well every time. Thanks Mr. Chavis"

Response time8 hrs

Response rate91%

Request Quote

JMB custom woodworking

New to Angi

Custom Cabinets - BuildInterior Trim and Decorative Moldings - InstallWood Stairs and Railings - Install or Replace

Serving Maxton, NC and surrounding areas

Approved

Custom woodworking at it's finest. Custom cabinetry to stair renovations, custom closet shelving fireplace mantels ,small renovation. I love doing it all. I have a passion/ obsession with woodworking. I take take great pride in what I do attention to every detail. Most customers think I'm even too picky. I grew up around it between my grandfather and my dad and my uncles around it the whole life.

Carpentry Framing - RepairInterior Trim and Decorative Moldings - InstallInterior Trim and Decorative Moldings - Repair+1 more

Serving Maxton, NC and surrounding areas

Approved

In business since 2005

Free estimates

Small jobs welcome

We are a locally owned and operated veteran company with over 5 years of industry experience. We value honesty and integrity, and stand behind our work. We specialize in doors, framing, drywall, appliances, and a variety of related projects. We pride ourselves on the quality of our work as well as our commitment to outstanding results. We look forward to building long-term relationships with our clients and guarantee your satisfaction!

Recommended by100%of homeowners

Carpentry Framing - InstallCustom Cabinets - Build

Serving Maxton, NC and surrounding areas

Approved

In business since 2023

Free estimates

Emergency services offered

"Found Sentri on Angi. Jeanette and Violet were very pleasant and efficient in getting a contractor to me in the time frame needed. The contractor was excellent and the roof looks great! I would definitely work with them again if I had additional projects."

25 neighbors recently requested a quote

Custom Cabinets - Build

Serving Maxton, NC and surrounding areas

Approved

In business since 2015

Free estimates

Emergency services offered

"Highly recommend! Chris is easy to work with and provides good quality services!"

+75

Response time4 hrs

Recommended by100%of homeowners

Request Quote

...

Showing 1-10 of 196

Woodworking questions, answered by experts

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

Yes, carpenters can fix squeaky floors. They have the expertise to identify the source of the squeak, whether it’s loose floorboards, subfloor issues, or joist problems. These experts also have the right tools and hands-on knowledge to secure the flooring and eliminate the noise, ensuring a long-lasting solution.

No, beams are the primary load-bearers for flooring or roofing systems, and they distribute the weight of the structure to your foundational supports, while joists bear far less weight and distribute their loads to the beams. Beams are usually thicker and longer, and they have support posts or foundation walls beneath them for support.

On average, the cost to hire a carpenter ranges from about $75 to $100 per hour, depending on the type of carpentry, location, size of the job, and skill level of the carpenter. Get quotes from at least three carpenters in your area to determine the best price for your specific project.

Many people, including professionals in the field, use baluster and spindle interchangeably to describe the vertical components of a railing (or technically, a balustrade). However, there are subtle or distinct differences, depending on who you ask. The most common interpretation is that spindles are thin or delicate versions of balusters.

The Maxton, NC homeowners’ guide to woodworking services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
Mar 18, 2026Mar 18, 2026
How Much Do Carpenters Charge Per Hour? [2026 Data]
Find out how much carpenters charge, including average rates, cost factors, and tips to help you budget for your next carpentry project.
Audrey Bruno
•
Aug 1, 2026Aug 1, 2026
10 Creative Projects You Can Make with Garden Scrap Wood
It’s not uncommon to have scrap wood lying around your garden, but there are plenty of creative projects that will help you give those spares a second life.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Bookshelf Building Pro
Learn how to hire a bookshelf building pro with expert tips on finding qualified carpenters, asking the right questions, and getting quality custom shelving.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Wood Stair Installation Contractor
Looking to hire a pro for wood stair installation? Learn how to find qualified contractors, questions to ask, and what to expect for your project.
Kristin Salaky
•
Aug 4, 2026Aug 4, 2026
How to Choose the Right Sandpaper Grit for Your Project
Sandpaper has a plethora of uses, which is why there are so many options. Learn about the various sandpaper grits to choose the right grit for the project.
Kaitlyn Pacheco
•
Aug 4, 2026Aug 4, 2026
How to Waterproof Wood With 3 Simple Methods
Three effective ways to waterproof your wood and protect it from damage: hand-rubbed oil, sealant coating, and staining. Read on to learn how, step by step.