Get matched with top gas log pros in Henrico, NC

This is a matter of personal preference, as each method has its own pros and cons. Oil furnaces are safer, but the smell can be off-putting to some consumers. Oil is also more expensive than gas. However, oil furnaces boast a higher BTU rate per hour, so a smaller amount of oil can heat a larger space when compared to a gas furnace.

Fixing a gas leak costs about $45 to $150 per hour for a plumber or gas line specialist. The job’s overall cost will vary depending on the location of the leak. A leaky junction or connection behind the stove or dryer will likely cost about $120 to $170. But for a leak that requires a gas fitter or plumber to excavate a pipe in the yard, the cost could rise to $1,500 to $5,000. Keep in mind that gas leaks are very serious issues, so don’t hesitate to contact a plumber or gas line specialist immediately.

In North America, pipe measurements are listed as the nominal pipe size (NPS). This measurement refers to the outside diameter. As an example, a 1/2-inch copper pipe has an outside diameter of 5/8 of an inch. If a hardware store lists a pipe as having a 2 NPS, it means that all the pipes with this measurement have a 2 ⅜-inch outside diameter, regardless of wall thickness and inside diameter.

Venting a gas water heater out of the roof is preferable in most cases. Heated exhaust gases naturally rise, so a vertical vent pipe is efficient. If you’re trying to vent through a pipe exiting a wall, the angle of the pipe may be more horizontal than vertical, making the venting system less effective. If you go through a wall, you may need to add a fan to ensure a successful expulsion of the gases outdoors.