Get matched with top countertop and backsplash pros in Godwin, NC

For most homeowners, quartz and quartzite countertops are similar in price. The average quartz countertop installation costs $80 to $220 per square foot, while quartz countertops cost $70 to $200 per square foot. Of course, there are outliers, like if you choose a highly customized, rare natural stone with high-end finishes.

The best finish for butcher block countertops depends on their intended use. If you plan to use the surface for food prep and cutting, a food-safe oil like mineral oil or tung oil is recommended. These oils provide a water-resistant, velvety matte finish but require regular reapplication. If the countertops are primarily for appearance or serving, a stain can add color and sheen. Polyurethane is another option, but it tends to show scratches more prominently, making it less ideal if you plan to cut directly on the surface.

Porcelain is a relatively affordable, mid-range countertop material. It typically costs between $50 to $70 per square foot.

Compared to quartz, porcelain is slightly more affordable, as quartz generally ranges from $50 to $200 per square foot. However, lower-quality, builder's grade quartz can be similar in price to porcelain.

Compared to granite, the price can be similar, depending on the quality of the stone. While granite slabs can range from $50 to $200 per square foot, you can find lower-end granite in the same price range as porcelain. High-end granites will cost significantly more.

Porcelain is generally more expensive than laminate, acrylic, and ceramic, but less expensive than high-end slate, concrete, and marble. A key benefit is that porcelain does not require sealing, which reduces long-term maintenance costs.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.