Get matched with top epoxy flooring pros in Ennice, NC

Concrete sealers will help your garage floors resist water, but they will not make the floor waterproof. You will need to purchase a specific waterproof floor paint for concrete and apply several coats over several days if you want your garage floor to be truly impermeable. While the process is similar to sealing the floors, the materials are different, and the need for multiple coats will extend the process and drying time.

Yes, you can seal old concrete, but proper preparation is essential. Before sealing, ensure the concrete is clean, dry, and free of any old sealant. To check if resealing is necessary, place a few drops of water on the surface; if they are absorbed in less than five minutes, it's time to reseal. If you are using the same type of sealer that was previously applied, you may not need to remove the old layer. However, if you are applying a different type of sealer, the existing one must be removed. Additionally, repair or fill any cracks to create a smooth base before you begin sealing.

Sealing resurfaced concrete is not an absolute necessity. However, it is recommended, and in most cases, a high-quality concrete sealer can protect the surface from stains as well as water penetration, extending the life of the resurfacing material. Some sealers are formulated to protect pigments from fading due to UV exposure. Sealer tends to enhance the colors in decorative resurfacing applications, making them more vibrant and richer compared to the duller, more faded appearance of concrete colors without sealer.

Unlike paint, concrete stain won’t peel off. Instead, the color absorbs into the surface of this porous building material. While it doesn’t peel, the stain only penetrates the top layer of concrete, and as the top of the concrete eventually wears away, so will the stain. However, this process is much slower than paint peeling, especially on low-traffic surfaces.