Get matched with top countertop and backsplash pros in Ellerbe, NC

If you are building a laminate countertop from scratch, instead of buying premade laminate countertops, you can use particle board underneath the laminate. You will need to use a sheet of particle board for the substrate, along with four-inch strips underneath the edges. For proper installation, make sure that any seams are level and use a sander as necessary before installing the laminate.

Concrete countertops usually cost more than granite. The average overall cost to install concrete countertops is $50 to $150 per square foot. Granite countertop costs average between $40 and $50 per square foot. While concrete materials might be cheaper than slabs of granite, the labor costs are considerably higher as it takes more time, specialized equipment and skill to form customized concrete countertops.

Undermount sinks have clips that attach to the countertop, but they have pros and cons. They are heavier than drop-in sinks, so they only work with sturdy countertops like natural stone and are a more expensive option. You might need someone to help you install the sink, depending on its weight.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.