Top-rated metal fabricators and restorers.

Get matched with top metal fabricators and restorers in Autryville, NC

Enter your zip and get matched with up to 5 pros

Need a pro for your metal fabrication and restoration project in Autryville, NC?

Select your specific project to find the pro for you.

TRUSTED BY AUTRYVILLE, NC HOMEOWNERS

  • Average homeowner rating star icon5
    Average homeowner rating
  • Verified reviews icon10
    Verified metal fabrication and restoration services reviews

Find Metal fabricators and restorers in Autryville

Avatar for iWeld Pro LLC

iWeld Pro LLC

5.00(
4
)
Approved Pro

iWeld Pro LLC

5.00(
4
)
Approved Pro
2021 years of experience
Free onsite estimate

iWeld Pro LLC is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests, and make their concerns the basis of our business.

"Our company hired iWeld Pro to fabricate and install a custom blower housing for one of test ducts in our facility. He tied in water and air in the same room where it was needed. They were very professional and efficient. "

Santos R on October 2025

iWeld Pro LLC is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests, and make their concerns the basis of our business.

"Our company hired iWeld Pro to fabricate and install a custom blower housing for one of test ducts in our facility. He tied in water and air in the same room where it was needed. They were very professional and efficient. "

Santos R on October 2025


Branagans Metal Works LLC

5.00(
5
)
Approved Pro

Branagans Metal Works LLC

5.00(
5
)
Approved Pro
Customers say: Quick response
2013 years of experience
Free onsite estimate

Edward Branagan with Branagans Metal Works, LLC, would like to provide you with the same exceptional metal fabrication services our current customers in the area enjoy. Call us today!

"I went online at 1:00 AM and got an immediate response from Branagan's Metal Works. I read the email and went to sleep. I texted Mr Branagan at about 12:30 PM and he said that he would be at my house to pick up the piece that I needed repaired. By 6:30 that evening Mr Branagan had the piece repaired and delivered back to me. This was an exceptional service. The piece looks brand new and works very well. I would recommend Branagan's Metal Works to anyone that needs any welding done. It was really a great experience, and I am very grateful for his exceptional work."

THOMAS D on October 2025

Edward Branagan with Branagans Metal Works, LLC, would like to provide you with the same exceptional metal fabrication services our current customers in the area enjoy. Call us today!

"I went online at 1:00 AM and got an immediate response from Branagan's Metal Works. I read the email and went to sleep. I texted Mr Branagan at about 12:30 PM and he said that he would be at my house to pick up the piece that I needed repaired. By 6:30 that evening Mr Branagan had the piece repaired and delivered back to me. This was an exceptional service. The piece looks brand new and works very well. I would recommend Branagan's Metal Works to anyone that needs any welding done. It was really a great experience, and I am very grateful for his exceptional work."

THOMAS D on October 2025


Avatar for North Carolina Welding, LLC

North Carolina Welding, LLC

5.00(
3
)
Approved Pro

North Carolina Welding, LLC

5.00(
3
)
Approved Pro
2020 years of experience
Free onsite estimate

North Carolina Welding, LLC is a locally owned and operated company that values honesty and integrity in all aspects of our business. Our dedicated team of professionals have over 10 years of hands on experience, to provide innovative ideas and suggestions tailored to your projects. Our services are customized to your individual needs, paying close attention to the details of each project that we are involved with. Please feel free to contact us today!

"These guys were great! Professional, curitious and they listened to my needs and wants. They took my ideas and completely fabricated what I needed, when I did not know how to fully describe what I wanted. Throughout the process they checked with me every step of the way, ensuring that I was satisfied. Awesome job! I will patronize this business again and I highly recommend them."

JUMAL B on March 2025

North Carolina Welding, LLC is a locally owned and operated company that values honesty and integrity in all aspects of our business. Our dedicated team of professionals have over 10 years of hands on experience, to provide innovative ideas and suggestions tailored to your projects. Our services are customized to your individual needs, paying close attention to the details of each project that we are involved with. Please feel free to contact us today!

"These guys were great! Professional, curitious and they listened to my needs and wants. They took my ideas and completely fabricated what I needed, when I did not know how to fully describe what I wanted. Throughout the process they checked with me every step of the way, ensuring that I was satisfied. Awesome job! I will patronize this business again and I highly recommend them."

JUMAL B on March 2025


American Repair Company, LLC

5.00(
1
)
Approved Pro

American Repair Company, LLC

5.00(
1
)
Approved Pro
2011 years of experience
Free onsite estimate

We are a locally owned and operated company that values honesty and integrity, and stands behind our work. Our services are customized to the individual project, paying close attention to the details of each project that we are involved with. We look forward to building long-term relationships with our clients and guarantee your satisfaction.

"Mike's awesome to work with. We have had him build us a lot of custom brackets and obstacles for our ninja warrior gym. He's easy to work with and gets the work done quick! Super quality work as well. Would highly recommend for any custom metal projects you have."

Caleb A on March 2025

We are a locally owned and operated company that values honesty and integrity, and stands behind our work. Our services are customized to the individual project, paying close attention to the details of each project that we are involved with. We look forward to building long-term relationships with our clients and guarantee your satisfaction.

"Mike's awesome to work with. We have had him build us a lot of custom brackets and obstacles for our ninja warrior gym. He's easy to work with and gets the work done quick! Super quality work as well. Would highly recommend for any custom metal projects you have."

Caleb A on March 2025


Avatar for ADaniel Performance Welding

ADaniel Performance Welding

5.00(
1
)
Approved Pro

ADaniel Performance Welding

5.00(
1
)
Approved Pro
2020 years of experience
Free onsite estimate

With over five years of experience in the welding industry, we are the service professionals you need to take care of your home or business. We handle all types of welding projects. We will treat your home as we would treat our own. Give ADaniel Performance Welding a call today, we look forward to working with you!

"I needed a rear bumper replaced on my 1997 Airstream Excella. The original rubber was cracked from dry rot. There is storage below the bumper. I ask AJ if he could come look at it. He fabricated the top of the bumper and coated it with a rubber sealant. I'm very happy with the results. "

Pauline B on October 2025

With over five years of experience in the welding industry, we are the service professionals you need to take care of your home or business. We handle all types of welding projects. We will treat your home as we would treat our own. Give ADaniel Performance Welding a call today, we look forward to working with you!

"I needed a rear bumper replaced on my 1997 Airstream Excella. The original rubber was cracked from dry rot. There is storage below the bumper. I ask AJ if he could come look at it. He fabricated the top of the bumper and coated it with a rubber sealant. I'm very happy with the results. "

Pauline B on October 2025


Avatar for Rodriguez Welding

Rodriguez Welding

5.00(
1
)
Approved Pro

Rodriguez Welding

5.00(
1
)
Approved Pro
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers
2023 years of experience

Rodriguez Welding is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, cost-effectiveness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. We never sacrifice quality for speed. We insist on a job well done and emphasize treating our customers like family. Above all, we are watchful of our customers' interests and make their concerns the basis of our business.

"Mr Rodriguez went out his way to ensure that the job was completed to my satisfaction. I will be hiring him again for future welding job."

German L on September 2023

Rodriguez Welding is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, cost-effectiveness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. We never sacrifice quality for speed. We insist on a job well done and emphasize treating our customers like family. Above all, we are watchful of our customers' interests and make their concerns the basis of our business.

"Mr Rodriguez went out his way to ensure that the job was completed to my satisfaction. I will be hiring him again for future welding job."

German L on September 2023


Aluminum Company of North Carolina

4.82(
316
)

Aluminum Company of North Carolina

4.82(
316
)
Customers say: Quality work
Recommended by 94% of Angi customers
Recommended by 94% of HomeAdvisor customers

27 in house employees plus crews. Cost is determined by the job. No travel charges. No service fee. May contact through email. Toll Free Number - (800) 672-4348. Additional DBAs - Aluminum Co of NC Inc, Aluminum Co. We are a James Hardie Preferred Remodeler.

"The folks at The Aluminum Company never fail to please! They replaced our exterior with vinyl siding about 8 or 9 years ago along with rebuilding both of our porches. We also hired them to replace our gutters and roof in 2017. The wood doesn’t hold up like it used to. Dallas suggested we replace our porches with Trex and vinyl posts. We are very pleased with the results! Beautiful work!!"

Linda F on September 2024

27 in house employees plus crews. Cost is determined by the job. No travel charges. No service fee. May contact through email. Toll Free Number - (800) 672-4348. Additional DBAs - Aluminum Co of NC Inc, Aluminum Co. We are a James Hardie Preferred Remodeler.

"The folks at The Aluminum Company never fail to please! They replaced our exterior with vinyl siding about 8 or 9 years ago along with rebuilding both of our porches. We also hired them to replace our gutters and roof in 2017. The wood doesn’t hold up like it used to. Dallas suggested we replace our porches with Trex and vinyl posts. We are very pleased with the results! Beautiful work!!"

Linda F on September 2024


Avatar for Fisher Precious Metals

Fisher Precious Metals

5.00(
14
)

Fisher Precious Metals

5.00(
14
)
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

Uncompromising quality and integrity in all of your precious metals purchases and sales. Specializing in gold & silver bullion. Avoid gold and silver retailers selling you their inventory at high premiums! We pay top prices for jewelry, sterling, diamonds and watches! Fisher Precious Metals is a national gold and silver dealer. Listed as a national dealer with the United States Mint, Fisher Precious Metals is a trusted resource for gold and silver coins and bars. Established in 1995, the firm works with individuals on all issues related to buying and selling physical precious metals, storage, security, estate liquidation and long-term exit strategies. John Fisher, the President, is an ICTA Board Member and is approved by the State of Florida to teach Continuing Education courses on precious metals investing to CFP's, CPA's, attorneys and insurance professionals. In addition, John is a frequent guest on various financial radio broadcast programs. Fisher Precious Metals is an A+ rated Accredited Business with the Better Business Bureau.

"It went great! We found Fisher Precious Metals on Angie's List, and after googling them, we found they had very positive reviews across the web. Although it was a 45 minute drive from our home, we felt it might be worth it, and it was. We made an appointment with John via email, arrived at 11:00, and spent just over an hour in his office. He evaluated the sterling silver set we had to sell and gave us what we felt was a very fair price. He'd given us an estimate on the value of the gold coins via email, and although the price of gold had fluctuated since he'd provided the quote, the final price was very, very close to the initial quote. We were happy to learn that they will also buy jewelry, as I have a few pieces I haven't worn in a very long time. We were very pleased with the entire experience and will definitely return to their company when we have gold or silver to sell, and we're happy to recommend them to our friends. One thing to keep in mind is that sterling silver sets are basically worth the price of the silver itself. We knew that going in, so we were not disappointed and, in fact, the price we received was a little higher than we'd expected."

Laura C on February 2018

Uncompromising quality and integrity in all of your precious metals purchases and sales. Specializing in gold & silver bullion. Avoid gold and silver retailers selling you their inventory at high premiums! We pay top prices for jewelry, sterling, diamonds and watches! Fisher Precious Metals is a national gold and silver dealer. Listed as a national dealer with the United States Mint, Fisher Precious Metals is a trusted resource for gold and silver coins and bars. Established in 1995, the firm works with individuals on all issues related to buying and selling physical precious metals, storage, security, estate liquidation and long-term exit strategies. John Fisher, the President, is an ICTA Board Member and is approved by the State of Florida to teach Continuing Education courses on precious metals investing to CFP's, CPA's, attorneys and insurance professionals. In addition, John is a frequent guest on various financial radio broadcast programs. Fisher Precious Metals is an A+ rated Accredited Business with the Better Business Bureau.

"It went great! We found Fisher Precious Metals on Angie's List, and after googling them, we found they had very positive reviews across the web. Although it was a 45 minute drive from our home, we felt it might be worth it, and it was. We made an appointment with John via email, arrived at 11:00, and spent just over an hour in his office. He evaluated the sterling silver set we had to sell and gave us what we felt was a very fair price. He'd given us an estimate on the value of the gold coins via email, and although the price of gold had fluctuated since he'd provided the quote, the final price was very, very close to the initial quote. We were happy to learn that they will also buy jewelry, as I have a few pieces I haven't worn in a very long time. We were very pleased with the entire experience and will definitely return to their company when we have gold or silver to sell, and we're happy to recommend them to our friends. One thing to keep in mind is that sterling silver sets are basically worth the price of the silver itself. We knew that going in, so we were not disappointed and, in fact, the price we received was a little higher than we'd expected."

Laura C on February 2018


Wilson Off Road

5.00(
8
)

Wilson Off Road

5.00(
8
)
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

Complete 4x4 and heavy fab shop with 9 bays to serve you. Winches,gears+lockers, bumpers, sliders,exo-cages, tires, rims, all 4 wheel drive parts, lift kits, lights.Additional phone - 9104237623.

Complete 4x4 and heavy fab shop with 9 bays to serve you. Winches,gears+lockers, bumpers, sliders,exo-cages, tires, rims, all 4 wheel drive parts, lift kits, lights.Additional phone - 9104237623.


HAMONT BODY WORKS INC

5.00(
10
)

HAMONT BODY WORKS INC

5.00(
10
)
Customers say: Quality work
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

Family owned and operated, independent auto collision and restoration facility. Serving the greater Cape Fear region since 1959. Member of Independent Garage Owners Association and the Nation Federation of Independent Business Owners. Represent customers in all facets of the auto claim process.

"I was surprised when they did not give us a written estimate to fix the SUV. But they are honest people and they did what they had quoted us . The job they did was fantastic you could not tell we had work done to our vehicle every thing matched it was perfect! I could not have asked for more. The people were friendly and wanted to help us . I don't remember when the last time was that I could trust people to do what they said they would do . But you can trust the people at Hamont Body Works INC. I will always take my vehicles to them."

Dorothy M on April 2018

Family owned and operated, independent auto collision and restoration facility. Serving the greater Cape Fear region since 1959. Member of Independent Garage Owners Association and the Nation Federation of Independent Business Owners. Represent customers in all facets of the auto claim process.

"I was surprised when they did not give us a written estimate to fix the SUV. But they are honest people and they did what they had quoted us . The job they did was fantastic you could not tell we had work done to our vehicle every thing matched it was perfect! I could not have asked for more. The people were friendly and wanted to help us . I don't remember when the last time was that I could trust people to do what they said they would do . But you can trust the people at Hamont Body Works INC. I will always take my vehicles to them."

Dorothy M on April 2018

Showing 1-10 of 50
Metal Fabrication and Restoration questions, answered by experts

You should not do your own welding unless you have the proper training and experience. Most home electrical systems can only handle MIG welding, which creates weaker bonds than TIG welding and won’t work on certain metals or metal thicknesses. Both welding forms usually require the use of shielding gas, which can be dangerous to store at home. Additionally, welding machines create temperatures of over 3,000 degrees, and the sparks can blind you if you don’t have the proper equipment. As such, it’s usually better to hire a professional welder for your welding projects.

A few materials are most commonly used when it comes to building a frame for an outdoor kitchen: wood, steel, and concrete or brick. While there’s no best option overall, each material is better suited to different needs. Concrete and brick are typically more customizable than other options, but aren’t as resistant to inclement weather as steel. Wood is the most affordable pick, but it is more susceptible to rot, mildew, and heat than the others.

Steel doors are among the most affordable options for your front door. Steel doors are worth the cost if you’re looking for a budget-friendly door that maximizes home security and energy efficiency. Plus, they can last up to 100 years, making them a high-quality and long-term investment.

If you don’t want to rely on paint to change the color of your stainless steel surface, there are a few other methods, but they require specialized equipment and skills. Some examples include powder coating, applying pigmented powder via an electrostatic gun, and electrostatic painting, which uses wet paints and has a less durable finish. The cost of powder coating is $40 to $600 per part, and electrostatic painting averages $60 per hour.

Welders typically charge about $65 to $150 per hour, often charging a minimum fee to cover overhead and travel as applicable. Even if the job takes less than an hour, you’ll still pay the minimum charge to cover the welder’s transportation costs if they come to you. You may still pay a minimum price if you take your project to the welder, as they still have overhead of a workshop and materials to expense.

The Autryville, NC homeowners’ guide to metal fabrication and restoration services

From average costs to expert advice, get all the answers you need to get your job done.