Do you nail or screw composite decking?

• <div><p>You can nail or screw composite decking, but 3-inch decking screws are the better fastener choice. Unlike nails, decking screws won’t back out of the composite material over time. There’s also little danger of splitting composite material when driving screws, so you don’t need to pre-drill holes unless otherwise recommended by your decking manufacturer. </p></div>

Is PVC decking slippery when wet?

• <div><p>PVC decking can get slippery when wet because it’s made from plastic. However, composite and wood decking can also be slippery when wet. It’s best to wear shoes with grippy soles when walking on a wet deck, no matter the material, and to be extra cautious not to slip and fall down. </p></div>

Get matched with top deck maintenance specialists in Shelby, MT

Q: Can I use Ipe wood as pool decking?

• <div><p>Yes, Ipe wood is a popular high-end choice for pool decking. It repels water and is naturally slip-resistant. It's not susceptible to mold, mildew, or rot, either, so it lasts longer and is cleaner and more hygienic than other popular decking materials. However, remember that due to its status, it is a very high-cost wood, and you might find that an alternative would serve you just as well for significantly less. </p></div>

Q: Does the underside of a deck need to breathe?

• <div><p>Any wood deck provides some ventilation to the area below, as is the nature of that type of <a href="https://www.angi.com/articles/how-often-should-i-inspect-my-deck.htm">deck design</a>. However, areas that experience excessive humidity and associated moisture benefit greatly from a dedicated ventilation system in the form of strip vents. This addition helps the various wood boards contract and expand evenly throughout the years and reduces the chances of twisting, warping, and buckling.</p></div>

Q: How deep should footings be for a ground-level deck?

• <div><p>Footings for ground-level decks need to be at least 12 inches deep, and some areas require them to be even deeper. A standard range for deck footings is anywhere from 12 to 48 inches. The minimum footing depth is determined by an area&rsquo;s frost line and soil conditions. If you&rsquo;re unsure how deep to install deck footings, check local building codes to find the minimum footing depth in your area. </p></div>

Q: Is PVC decking slippery when wet?

• <div><p>PVC decking can get slippery when wet because it&rsquo;s made from plastic. However, composite and wood decking can also be slippery when wet. It&rsquo;s best to wear shoes with grippy soles when walking on a wet deck, no matter the material, and to be extra cautious not to slip and fall down. </p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your deck maintenance project in Shelby, MT?

Select your specific project to find the pro for you.

Verified Reviews for Deck Maintenance pros in Shelby, MT

*The Angi rating for Deck Maintenance companies in Shelby, MT is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Deck Maintenance needs.

*The HomeAdvisor rating for Deck Maintenance companies in Shelby, MT is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Deck Maintenance needs.

Last update on July 22, 2025

Reviewed in July 2025
The entire process from start to finish was a breeze. The windows look great and the function as advertised. The installation crew was amazing. We enjoyed having them around for two days. The entire house, both inside and out, was spotless. We've received a lot of compliments from friends and...
Renewal by Andersen of Montana
Request a quote
Reviewed in December 2022
These guys were horrible DO NOT HIRE THEM one of the movers stole from me a bottle of change and cologne my mother's prescriptions they were hired through movinghelp.com they broke a piece of persian tiger marble from an antique that belongs to my wife they damaged my wife's bed frame and the...
Odd Job Fellas
Request a quote
Reviewed in September 2022
Be wary when looking for a plumber. I contacted Edwards Plumbing and Heating for quote to install a second shower head. I was charged an $85 service fee for the quote. Over a week later, I still have not received my quote. I contacted Edwards Plumbing and Heating to ask for a refund on...
Edwards Plumbing & Heating
Request a quote
Reviewed in April 2021
Never got back to me with estimate.
805 Contracting, Inc.
Request a quote
Reviewed in April 2020
Very knowledgeable and friendly. Gave us multiple options to fix the issue. Highly recommend them.
Harts Plumbers, Electricians, & HVAC Technicians
Request a quote
Reviewed in February 2018
Valley plumbing was quick. They took time to explain what I needed to know about water softeners before the install to make sure I was making an informed decision. The techs were on time and very professional.
Valley Plumbing Heating & Cooling
Request a quote
Reviewed in December 2017
Robert responded to my work request promptly, and with little information I was able to receive a quote. He had excellent communication on the front end of the project, while we waited on weather and scheduling. Robert and Vern did a great job patching up the exterior of the door. Great work!
Golden Wood, Inc.
Request a quote
Reviewed in March 2016
They were quick and thorough
FRA Landscape and Concrete, LLC
Request a quote

Find Deck maintenance specialists in Shelby

Killam's Get It Done Maintenance & Repairs Service Great Falls MT

New to Angi

Deck, Fence, Patio or Porch - Clean and SealDeck, Fence, Patio or Porch - Clean and Seal - For Business

Serving Shelby, MT and surrounding areas

In business since 2019

Free estimates

Killam's Get It Done is your industry expert in landscpaing the Great Falls area. We pride ourselves on our extreme professionalism and attention to detail. Our customer satisfaction guarantee will assure you we will not leave your property until you are completely satisfied with our work. Give us a call today we look forward to working with you!

Request Quote

Allen's Siding & Windows, Inc.

New to Angi

Deck, Fence, Patio or Porch - Clean and Seal

Serving Shelby, MT and surrounding areas

In business since 1988

Allen's Siding & Windows, Inc., is a Full Service,Owner Operated Company for over 17 years in complete exterior home improvements from custom design additions, sunrooms, patios, and decks to complete siding and window installations and repairs as well as all exterior window treatments including custom shutters and awnings. We specialize in ALSIDE ULTRAMAX Windows, which have been energy star partner for 3 years running. We work with you from start to finish with complete client focus, and professional personalized service giving superior craftsmanship with attention to each detail to ensure we create the vision you have for your home. Hire The Contractor not a Salesman. Please see our website at www.sydngys.com

Request Quote

Steve brown

New to Angi

Deck, Fence, Patio or Porch - Clean and SealDeck, Fence, Patio or Porch - Clean and Seal - For Business

Serving Shelby, MT and surrounding areas

In business since 2019

Free estimates

Ranch work \nWell experienced

Request Quote

Deck Maintenance questions, answered by experts

Yes, Ipe wood is a popular high-end choice for pool decking. It repels water and is naturally slip-resistant. It's not susceptible to mold, mildew, or rot, either, so it lasts longer and is cleaner and more hygienic than other popular decking materials. However, remember that due to its status, it is a very high-cost wood, and you might find that an alternative would serve you just as well for significantly less.

Any wood deck provides some ventilation to the area below, as is the nature of that type of deck design. However, areas that experience excessive humidity and associated moisture benefit greatly from a dedicated ventilation system in the form of strip vents. This addition helps the various wood boards contract and expand evenly throughout the years and reduces the chances of twisting, warping, and buckling.

Footings for ground-level decks need to be at least 12 inches deep, and some areas require them to be even deeper. A standard range for deck footings is anywhere from 12 to 48 inches. The minimum footing depth is determined by an area’s frost line and soil conditions. If you’re unsure how deep to install deck footings, check local building codes to find the minimum footing depth in your area.

You can nail or screw composite decking, but 3-inch decking screws are the better fastener choice. Unlike nails, decking screws won’t back out of the composite material over time. There’s also little danger of splitting composite material when driving screws, so you don’t need to pre-drill holes unless otherwise recommended by your decking manufacturer.

PVC decking can get slippery when wet because it’s made from plastic. However, composite and wood decking can also be slippery when wet. It’s best to wear shoes with grippy soles when walking on a wet deck, no matter the material, and to be extra cautious not to slip and fall down.

The Shelby, MT homeowners’ guide to deck maintenance services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Mitchell Grant
•
Jul 9, 2026Jul 9, 2026
How Much Does It Cost to Paint a Pool Deck? [2026 Data]
The cost to paint a pool deck depends on the dimensions and material, the type of paint, and whether you DIY. Read on to help determine a project budget.
Xiao Faria daCunha
•
Jul 9, 2026Jul 9, 2026
How Much Does Under-Deck Drainage Cost? [2026 Data]
Under-deck drainage costs can be pricey. Your final quote will depend on labor, materials, and the size of your deck. Start budgeting with this guide.
Angi
•
May 30, 2026May 30, 2026
How Much Does Steel Deck Framing Cost? [2026 Data]
Discover steel deck framing costs, including material, labor, and installation factors. Learn how to budget and choose the best option for your home project.
Jenna Jonaitis
•
Jul 9, 2026Jul 9, 2026
Top Deck Maintenance Tips for Every Decking Material
Deck maintenance is vital to protecting a wooden deck. Cleaning, staining and sealing a deck after pressure washing will add years to its lifespan. Protect a deck by following these deck maintenance tips for cedar and other types of wood materials.
Lawrence Bonk
•
Mar 19, 2026Mar 19, 2026
Deck Maintenance Checklists for Every Season
Keep your decking looking new with this deck maintenance checklist.
Deirdre Sullivan
•
Jul 31, 2026Jul 31, 2026
7 Best Maintenance-Free Decking Materials
Finding maintenance-free decking that works for your home, budget, and lifestyle can be challenging. This guide lists the 7 best low-maintenance deck materials.