Best locksmiths near Glasgow, MT

Lock bumping is a technique locksmiths use to quickly and quietly open a pin tumbler lock, typically found in most types of deadbolts. It involves inserting a specially crafted key, or bump key, into the lock and tapping or "bumping" it with a mallet or similar tool. The force applied causes the lock's pins to jump momentarily, allowing the lock to be turned and opened. Unfortunately, thieves also use this technique to break into homes. Luckily, products like a deadbolt strap will fortify your lock.

If your key breaks in a lock, first remain calm and avoid forcing the broken piece further in. You may be able to remove it yourself if a portion of the key is still protruding from the lock. To aid removal, lubricate the keyhole with a graphite-based spray. Then, try using tools like pliers, tweezers, a bobby pin, or even a jigsaw blade to gently grasp and pull the broken piece out. If these methods don't work, you can't reach the key, or you're concerned about damaging the lock, it's best to call a professional locksmith for assistance.

If your door handle turns without opening, the most likely culprit is a loose or stripped spindle. This part connects the handles to the latch mechanism, and when it’s not properly engaged, turning the handle does nothing. Other issues might include a broken latch, loose screws, or even something small blocking an inner mechanism. In any case, it’s usually a matter of tightening, adjusting, or replacing a worn-out part inside the handle assembly—or calling in a professional to do it for you.

Rekeying a lock changes the internal mechanism so that a new key works, while replacing a lock involves swapping out the entire hardware. Rekeying is a good, cost-effective option when you want to ensure old keys no longer work, such as after moving into a new home or losing a key. It's also ideal if you want to keep your existing lock hardware. You should opt to replace the locks entirely if you want to upgrade to a more secure or different style of lock, if the current lock is old or damaged, after a break-in, or if too many copies of the old key exist.