Get matched with top ceiling fan pros in Glasgow, MT

It’s possible to install your own ceiling fans if you’re replacing an existing one. This work doesn’t require a permit and technically doesn’t necessitate a certified electrician, but it’s still a good idea to hire one. There’s always a safety risk when working with electrical components, even if you shut the power off at the breaker. If you’re installing a new ceiling fan where there currently isn’t a fixture, you will need a licensed electrician to run the new wiring and pull permits for the work.

If you’re removing a ceiling fan without visible screws, start by locating the fan canopy—a round cover placed above the fan blades and motor. There should be a thin ring that can be turned counterclockwise to remove the canopy and reveal the screws. After unscrewing the fan, you can disconnect the wires and remove the entire fan from the mounting hardware. For safety, make sure the fan switch is turned off before you remove the canopy. It may be easier to remove the fan blades first, too.

The number of blades for your fan poses both advantages and disadvantages. Typically, the more blades on a fan, the better the air distribution and cooling effect, but this also means that your fan will have more wear on its motor. For small rooms, three-blade fans should work fine. For larger areas like living rooms, four or five-blade fans might be the better option. 

Manufacturers of ceiling fan-rated boxes must indicate on the box that the unit is for that purpose. To check your model, remove the light fixture and look inside the box for wording that says it’s rated for fan use. If you don’t see words saying so, it likely needs to be replaced with an appropriate one that is rated for use with a ceiling fan.