Get matched with top dryer vent cleaners in Frazer, MT

Yes, you can snake a roof vent. This is one of the best ways to clear a problematic clog in a plumbing vent. You can either snake the vent by climbing on the roof and sending the plumber’s snake or auger directly down the vent opening, or you can cut a hole in the vent from inside the attic and snake it from there.

Signs that your dryer is about to catch fire include a burning smell or the dryer and the clothes getting hotter than usual. If this happens, turn the dryer off immediately and call a repair professional. Another less urgent sign is that your clothes are taking longer to dry than normal. If this is the case, check the lint trap, vent, and duct to make sure they are all clean. If they are, you may need to call a pro to find the source of the issue.

Your dryer vent hose should be as straight as you can possibly get it. A straight vent means less lint buildup in the hose. If the hose has a lot of bends and turns, it’s much easier and much more likely for lint to get stuck along the line, meaning you’ll have to clean it out a lot more often to decrease the risk of a total blockage or a fire.

You’ll find the backdraft damper near the top of the range hood (where it connects to the ductwork). However, some range hoods also have a second damper, which is located close to the roof or exterior wall where the ductwork ends. If you don’t see a damper in either of these places, you might not have one.