Get matched with top asphalt driveway pros in Fort Benton, MT

An ideal driveway gradient is between 2% and 5%. Anything lower than 1% or higher than 15% can cause problems for your car or property. A driveway with less than a 1% slope increases your likelihood of flooding and water damage, while a driveway with a 15% grade or higher can be too steep for safe traveling.

A solid driveway starts with the right asphalt mix, and for most homes, dense-graded hot mix asphalt (HMA) is the most recommended. It’s both durable and flexible, making it a reliable choice for residential use. A properly compacted 2-3 inch layer on a well-prepared crushed stone base will hold up for years. In areas with harsh winters or scorching summers, a slightly modified mix can help prevent cracking and rutting. No matter the climate, quality installation is just as important as the material itself, so hiring an experienced contractor ensures a smooth, long-lasting driveway built to last.

Give your driveway at least 24 to 48 hours to dry. After 72 hours, you can walk or park on it, but tread lightly. It might look solid, but it’s still soft and can be easily damaged. It can take 30 days to a year for an asphalt driveway to fully cure, so avoid parking extremely heavy vehicles on it. For the best results, always check with your contractor for their advice. Different mixes and weather conditions can affect curing times, so it’s worth waiting longer if it means a driveway that lasts.

You should contact your driveway installer before winterizing a newly installed driveway. Winterizing it before the asphalt or concrete has fully cured can damage the driveway. But in many cases, you don't need to winterize a newly installed driveway anyway since it's likely freshly sealed and won't have much damage yet.