Get matched with top roofers in Shuqualak, MS

A roof replacement can take anywhere from one to 14 days. For most homes, a full replacement that includes tearing off old materials takes about one to two days, though the average project can last up to 12 days. The exact timeline depends on several factors, including the roof's size and complexity, the type of roofing material, the crew size, and weather conditions. Certain materials take longer to install; for example, metal roofs can take seven to 14 days because the material is more difficult to work with than asphalt shingles, wood, or tile. A re-roofing project, where new shingles are installed over old ones, can take half the time or less. It's also important to factor in the time needed to obtain necessary permits. A professional roofing contractor will typically complete the job faster than a DIY approach.

You’re going to need a permit for nearly every roof-raising project. This is a very important step, as the work you’re doing has serious safety considerations. Professionals are the ones to handle this type of work—including sourcing the permits—as they have the expertise required to perform the work safely. Insurance and warranty are usually voided if you do this work without a permit, and you may even be required to halt construction and tear it down as a penalty for working without a building permit.

The best type of roof vent depends on the size, type, and construction of your roof as well as the environmental conditions in and around your home. In many cases, an active ventilation system that draws in fresh air and exhausts air out through the attic is the most effective. Active ventilation systems include roof ridge vents with baffles, turbine vents, and soffit vents that are used together with another type of vent.

In most cases and locations, roofs with a single layer of asphalt roofing shingles won't require roof removal before installing a metal roof. However, underlayment may be necessary on roofs with moderate shingle damage. Heavily damaged roofs or ones with multiple shingle layers will most likely require removal before a metal roof can go on.