Get matched with top gas log pros in Roxie, MS

Yes, it’s possible to convert an oil furnace to gas. However, you may have to replace the furnace completely instead of simply converting it. If the original oil furnace has had any type of damage or is older (typically considered over 15 years old), then you will likely need a full replacement versus a conversion.

Fixing a gas leak costs about $45 to $150 per hour for a plumber or gas line specialist. The job’s overall cost will vary depending on the location of the leak. A leaky junction or connection behind the stove or dryer will likely cost about $120 to $170. But for a leak that requires a gas fitter or plumber to excavate a pipe in the yard, the cost could rise to $1,500 to $5,000. Keep in mind that gas leaks are very serious issues, so don’t hesitate to contact a plumber or gas line specialist immediately.

The size of a pipe isn’t always the outside or inside diameter. Rather, it’s a nominal diameter that depends on the type of pipe. For male pipes, you’ll need to measure the outside diameter. For female pipes, you’ll need to measure the inside diameter. You’ll then need to use a nominal diameter conversion chart to get the actual pipe size you’d buy in the store.

Only yellow Teflon tape is approved for use on gas lines. Also called yellow PTFE tape, it is thicker and specifically rated for use on natural gas and propane connections. Standard white Teflon tape is not safe for gas applications. If you have questions about sealing gas line connections, contact a pro like a gas line contractor or plumber who installs or runs gas lines.