Get matched with top interior painters in Rosedale, MS

When it comes to painting your bricks, you’ve got a few options. Traditionally, lime wash (a mix of aged, burned, and crushed lime and water) was used to whitewash brick or stone. You can also find premixed brick whitewash paint that cuts out a few steps and lets you get started faster. However, for the best results, we recommend using a DIY whitewash (white acrylic paint mixed with water).

While often used interchangeably, flat and matte paints are not the same. Flat paint has no gloss and is completely shine-free, while matte has up to 10% resin, giving it a slightly velvety appearance. That small amount of gloss in matte paint gives it a more elegant, modern appearance than flat paint, though flat paint is ideal for hiding imperfections in even the most dented, scratched, and repeatedly repaired surfaces.

While there are some sealants designed to be spray-painted over asbestos to encapsulate it, you still want to make sure it’s a specifically designed product for this purpose—not just run-of-the-mill spray paint. Furthermore, be sure you aren’t inadvertently spraying the asbestos fibers around when you take on this project, and as always, be sure to wear the proper protective gear, including a P-100-rated respirator and a disposable body suit, so as not to inadvertently breathe in or spread asbestos fibers.

While you can paint brick or concrete pavers, you shouldn’t. Even with a matte finishing paint, it still creates a reflective surface where sunlight bounces off. This increases heat during summer months, making the pavers hard to walk on. The reflection can also damage your eyes. Finally, paint seals the pavers in the least desirable way and makes them impermeable, trapping water and moisture inside, which can cause other problems. Paint layers also chip easily.