Get matched with top toilet pros in Richton, MS

While you might think that phantom flushes are simply eerie, they are bad for your toilet (and wallet). These flushes indicate a leak somewhere in the toilet system that needs repairing. These leaks can cause damage to your walls, flooring, and even your plumbing system. While one random flush every now and then might not seem like a big deal, leaving it unattended can lead to bigger problems. 

While technically possible, it is unlikely that a clogged toilet will fix itself. Clogs caused by water-soluble materials like toilet paper or human waste may eventually break down in the water, allowing flow to resume. However, this can take time, and any clogs from solid objects require manual removal. In most scenarios, especially if you don't have another bathroom, it is best to fix the clog yourself or call a plumber.

To test for toilet leaks, use water coloring in the water tank and see if the water slips into the bowl from the tank. This test will indicate if there’s a problem with the flapper or refill tube. You can also put water coloring in the bowl of the toilet to see if there is a leak there. If there is, you should see the colored water on the outside of the toilet bowl or on the floor. 

You generally cannot replace a 10-inch rough-in toilet with a 12-inch model without making significant plumbing updates. A 12-inch rough-in toilet will not fit a 10-inch rough-in space because the floor drain is in the wrong position. To accommodate the larger toilet, you would need to move the drainpipe, which could cost between $0.75 and $30 per linear foot, plus labor. In most cases, it is more cost-effective and simpler to purchase a new 10-inch rough-in toilet. However, it is possible to install a 10-inch rough-in toilet in a 12-inch space by using a longer connector.