Get matched with top pool table assembly pros in Myrtle, MS

Yes, pool pumps use a significant amount of electricity, making them one of the biggest energy consumers in a home. A pool pump can use up to three times as much electricity as a refrigerator. Typically, a residential pool pump consumes about 1 kilowatt-hour (kWh) for every hour it runs. Because pumps often need to run for about eight hours a day to properly filter the water, this can add up to an annual consumption of 3,000 to 5,000 kWh, which can cost between $480 and $800 per year based on average electricity rates.

The amount of electricity your pump uses depends on its size, energy efficiency, and daily run time. To lower your energy consumption, you can choose an energy-efficient or variable-speed pump, ensure it is correctly sized for your pool, and run it only for the minimum time required to keep the water clean.

Pool maintenance costs an average of $230 per service, with prices ranging from $50 to $750 per service, depending on several factors. The type of service will usually be the most significant cost factor, as opening and closing a pool takes a few hours and can total $400 or more, while regular cleanings could cost under $100. The size of your pool and the type of pool—above-ground, in-ground, saltwater—can also affect the price of maintenance.

Shock can clear a cloudy pool if the problem is insufficient free chlorine or an accumulation of chloramines from “spent” chlorine. However, it can make the issue worse if a high level of chlorine or a pH imbalance is the root cause of the problem. Test your pool water before treating the cloudiness to ensure you’re making the right call.

Infinity pools do require slightly more maintenance than other pools because you’ll need to constantly monitor the water level. If the water level is out of whack, it won’t correctly flow over the edge, which gives the pool its infinity look. 

That said, the rest of the maintenance is largely dependent on the type of material you choose. Concrete needs a little extra care to prevent algae growth, and you will eventually need to resurface it. Fiberglass and vinyl liners are algae-resistant but they’re not as durable.